CHAINSAW

I think Lakers Customs look the best IMO.

Im also interested if you do custom orders.

Ive got some new rear sand stars Im willing to trade for your paddle rears. These are 20x11x10 (both left and right), and yours must be for 10" rims also. Ive had these on the dunes for a total of 3-4 hours, and they are still new looking. No rips, tears, to anything wrong with them, other then I dont like how they handle. Does not include rims, tires only trade.... I dont need any rims!! Here is what Im willing to trade for. Keep in mind, for 10" rims only. Looking for Aerospeeds, Sand Gear, or Geckos. Would even trade for Skat Trak Gliders, but I doubt anyone is willing to do that.. haha. I prefer to see pics, but if not no big deal... you ship first. So if your trying to pull a fast one on me, all your gonna get back is your tires... C.O.D. If your a good honest person, and send what you say your sending, Ill ship the sand stars back the day after I recieve yours. email me at [email protected] dont pm me, Ive been having problems with pm's.

http://cgi.ebay.com/ebaymotors/Banshee-fib...sspagenameZWDVW

whip that little guy out.. lets compare..

this thread name might as well be changed to... "my dick is longer then yours" by the way.. Id win! 5

Ya know,.. his bike really doesnt qualify as a drag bike anyhow. All it is, is a shined up banshee with a couple of trinity "mods"

You would have better luck trying to part it out and reach what your wanting, then selling it whole.

www.cosmicquads.com The best place Ive found, and if you can dream it.. they can sew it.

I like Laker customs the best... Id load up a pic but this site blows for attatching pics.

You will have to trim it down some at the top. The Lakers are lil bit more skinnier up top, but it is possable.

bike is sold.. thanks

Ive had this for about a year, but have my main ride that needs a rebuild, so the fun toy has to go. I have it listed on ebay, and accepting best offers on ebay also. Im located in SW kansas, and willing to drive a ways to meet. All the details in the link below, along with pics. http://cgi.ebay.com/ebaymotors/ws/eBayISAP...item=4592179834 Asking $700 and again, accepting best offer. You can also email me at [email protected]

www.cosmicquads.com is a good place to see some killer seats!! They have lots of pics

Im preaching to the choir here I think, but that isnt a 3 month paint job. It is however, a $100 paint job. If turn around was a week, then that might be worth it to some. Its true you get what you pay for, and with painted plastic I wish you guys the best of luck with them.

I just got started airbrushing myself.. been doing it just about a year now. I have 10 years of body work though, so I have a lot of knowledge of paint and materials. Thats a nice advantage, because 9 out of 10 airbrush artists, dont know much about body work, or clear coating and have someone else prep and finish everything. Ive found that instructional videos helps a lot. Craig Fraser videos especially, because his videos are aimed at people just starting out. I reccomend the cheap tricks series, and the intro to airbrushing videos, you will learn a lot from them. Also starting out, I reccomend AutoAir colors. They are water based, and a sinch to clean up. I dont have a shop or anything, just a spare bedroom in my house, and thats where I do all my airbrushing. Since they are waterbased, there are no fumes, and the over spray is minimal and harmless... wipes up with a wet rag. Im a huge horror fan to helldriver. Im in talks with a guy now, wanting a pinhead 250R hood..... so once I finish up a few I have in my book, I might give that a shot.

Not on the 3d fenders with something up front,. no holes. They are for relocated radiators, that sit below the hood. I am about to start on a set of 3d fenders for a guy, thats going to be totally different, and still have the holes in the front, so stay tuned for that. The Friday the 13th themed is on hold right now. Since Ive sold a couple, word has spread and I have some jobs lined up before I can get to the ones I was working on. I did cast the hockey mask in fiberglass allready though, and its ready to rock n roll.. its gonna look pretty cool. Here is my halloween costume from last year.... I airbrushed all of it, including the hockey mask.

This is the only one with the skull like this.. lol Dont know what your seeing.. must be all the pics of the same set of plastic confusing you. I have done a screaming banshee skull also... like all my hoods, each one is vastly different. Not sure where you think they are all alike. Yeah, fiberglass and bling bling isnt something the trail guys like. I never set out to please everyone.. just mainly the big dog draggers that love to be different and have something no one else in the world has.

Here it is.. the Maltese Skull fiberglass hood, with matching seat by cosmicquads.com

check out www.cosmicquads.com They can hook you up with some killer seats.

Here is my first set with an open front. I finished them up for a guy in California, and will probably do a few of the open face ones next.

Hey thats a good question!! The answer is, right now my 3d Hoods are not designed for your normal stocker style trail or dune shee. These are designed for the all out drag and show bikes that have relocated radiators below the hood. Thanks for the compliments In the future I will do some that are geared more for the stock style of shee.

www.eyekandi.biz Is one of the best, and cheapest places to get your stuff polished. I highly reccomend them.

Traded it off today.. thanks

Ive got a super clean ex-dragster 87 shee Im wanting to trade. This was a drag bike back in the day, but has been tuned down to be a duner. It would be no problem making it rip in the drags again. Here are the specs. The following is chromed= J arms, lower a arms, all 3 shock springs, +8 swingarm, sprocket and rear brake hubs, axle, tie rods, footpegs, kicker, and a few other odds and ends. the frame is powdercoated black. The plastic is new, only 4 hours on it Laker Customs. The swingarm is a lonestar I believe, but not positive on that... its a +8" and the dog bone has been polished. The clutch cover has been polished, along with both cylinders and the head. The pipes are Toomey T4s, along with the toomey silencers. Its got a toomey 2 into 1 airfilter. the cylinders have been ported and polished, and Im unsure of what bore its on, but the previous owner just had it rebored. The transmission has just been gone through and everything bad or worn replaced. The over flow bottle has been relocated to the front, and its got 2 big inline billet coolers. I also run engine ice in the the motor. The entire motor has been gone through, and there are no problems with it. A lot of the welds have been smoothed, and some holes filled in up front from when it was a dragster. It also has the stock carbs back on it, to make it a reliable duner again, although throw on some bigguns and Im sure it would be a nice drag bike again. The new chain only has 4 hours of ride time also. The front rims are Douglas black labels with stock tires, and the rears are Douglas Red labels/champion beadlocks with 9 paddle 22"x8" haulers. Im looking to trade for a stock to mostly stock 4 stroke. Id like a Raptor or Predator or any larger bore sport ATV. Id also consider a Z-400 or the kawi or arctic cat versions, or even a DS650. Not interested in 400ex's at all, sorry. I would even consider a trade for a pretty much stock banshee or bone stock banshee, but would rather get a 4 stroke. the reason Im wanting to trade, I like to ride big dunes, and do a lot of wheelies. I like to putt around a lot to, and not have to worry about over heating. This banshee is really nice and clean, but it doesnt fit my riding style. There is nothing wrong with it, and you wont be dissapointed. What isnt chromed or powdercoated, is polished... super clean and nice. Im located in Southwest Kansas (Hugoton) and would drive a ways to meet. pm me, or email me at [email protected]