superbanshee03

I have a set of toomey t6's I would like to sell or trade for some rockets or cpi's. They are in good shape has a little rust on the inside of the pipe but not noticable, I will pollish it off before I send them, Kinda hard to reach on the bike to polish them. There are no dents in the headers, but there is a small rub mark on the scilencer from something where I had it lowered maybe the brake but thats all. Getting into dragging!

Nice sig!!!

Thanks alot, I was begining to wonder if anyone knew. Ill give it a try.

This Sucks!!!

Does anyone know? Who runs 33pwk's, no one, what's up you guys!!

I just bought some 33 pwk and I need to know about where to start! I have stock carbs 370 mains stock piolit needle in the 3rd or 4th poistion airscrew 1-1/4 out. Is there a caculator or something that can convert you stock jetting to keihin aftermarket jetting? Could someone give me an idea where to start.

Thanks for the info guys!!!

NO NO NO its not my kick start , I checked for all the common sense things!!Its comming from the bottom end, maybe crank I don't know, but my clutch just started slipping do you think that being wore out can make noise or maybe something came loose in there, any help would be appreciated.

+3 to +4

ok guys, I have a noise coming from my bottom end and can't figure out what it is it sounds like a little rattle when it idles, but give it gas and its not as bad or maybe the pipes are to loud to hear. I just had a port job and had my flywheel lightened with a fresh top end, I though it was my flywheel but checked it and it looks good, checked for slack in the crank by moving my flywheel up and down but no free play, whats up!!! I talked to a guy and he said if my right exhaust was smoking more than the left he said I have a bad crank seal, well it does smoke more so I dont know, would this make a rattle? Does a banshee crank have a seal in the middle of the crank or just on the outsides, never took a banshee apart? Please help, any would be a big thanks.

say about $150.00

yamalube 2R 32:1

Thanks, I'll probably try the tusk. Will the 34mm carbs off a 250r work?

What about the carb situation?

Anyone!!!

10.0 sec (lol)

Anybody!!!

I have just had my bike upgraded with new wiseco pistions, port work, lightned flywheel, and reeds, my stock clutch is slipping in the upper gears and I was wanting to replace it. I have heard that tusk makes a good clutch but wanted some different opinions on what I should get. Also do you think I would benefit form some 34mm carbs, I have read some post that recemend 33's or 35's but why not 34's am I missing something?

I raced at popular bluff, the last race they had a few weeks ago. I was on my girl friends orange V Force and that thing was wa to heavy and tall, did anyone see me racing?

There is a race in Popular Bluff this weekend?

yes, They are very good reeds and would recommend them to anyone, the reason I am selling them is becouse I just got alot of work done to my motor and need the money, I didnt have the money to buy replacement reeds so I was going to sell them and maybe get some carbs or tires which I need. I had a buddy with some other reeds he let me borrow untill I get back on top of everything.

I have a set of G3 powercurve reeds by 1dir racing for sell. One reed is chipped at the end and idels rough. Replacement reeds are $40.00. I paid like 200 for these reeds. Their site is 1dirracing.com check them out and make me an offer. Great reeds and the guy that sells them name is Will and he will help you dial it in to a T. Great custumer service, so call him (number on web site) and look at their site and make an offer (reasonable).

How much are you going to adjust it?

Thanks, Boonman

I was wondering what a degree key has to do with running race fuel? For instance, I have a 3deg key and my compression is 155psi, I just rebuilt mine and had it ported and I am planning on not running RF but kinda confused on what the advanced timing effects. I have herd that running RF is determined by your comp. and timing but dont know about the timming thing, could someone please help me on this!!