hill43
-
Posts
33 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Everything posted by hill43
-
I have just about any thing you need ITP BaJA rims front or rear some beadlocks or just some reg t-9.
-
I have just about any ITP wheels you need wanting to trade for some front flat track tires.
-
I have some i will trade you what size do you need? 9x8,10x8? please just contact me
-
ok guys just tore down a used banshee and the pistons has 2.00 on top of the pistons what bore is this .50 or 1.00 when order pistons?
-
i have some any size you need i will trade stright up
-
I still have the Used 4 gal tank only used 4 times very good shape only light scratches from me taking a S.O.S pad to one side I can send photos if you email me 100.oo free shipping.
-
I say just take it to the quys at Duncan Racing they have been doing banshees as long as any one.
-
I pm you and sent you a email I beleive he only wants one if any one still wants the other.
-
I have a Blue 4 gal IMS tank for sale never used still in box asking 140.00 plus 10.00 shipping and I also have a Blue 4 gal IMS tank use only 3 times for sale 100.00 free shipping both work great and have no problems. I am located in So.cal. please contact me at [email protected] . i will try to post a pic of the used one on bike but i have took the decals off the tank.
-
I have new cable with new carbs and in the past i have got that lever that James Lucky sells and it worked good i just was not sure if a Honda or may be a Terry cable had better workings inside and made it better. thanks guys
-
I have had trouble as with everyone else i am sure. after putting 34mm carbs on the bike the throttle is very hard to push. This was a common mod on the yfz450 people was putting 400ex thumb throttle on there will this work on a banshee? does it make it easier? what have some of you done to make a inprovement? Thanks for any help.
-
I have a set of black widow and a set of triple rate and love them the black widows are as smooth as any shock that i have rode, I also sent my triple rates in to have them rebuilt and it only took two days and I had them back at my door works is a great company
-
ooooo guy with too much time on his hands speaks up. this is just a heads up do the reseach on other sites. beware before you send money.
-
Just a heads up this guy has no morals what so ever I would suggest stay away before he rips you off.
-
Sand Skate II's for haulers or front paddles
hill43 replied to icecold_shee's topic in Swap and Trade
i will trade you some front sand stars for you rear tires. -
Thanks guys, yea i did a little reseacrh on duncans web site and they tell you to place the coil on top. Thanks
-
i have the Black widows and I really like them nice shocks for the money I will try to post pictures late
-
the ITP H-d hooks really well and by the way the weigh 21 LBS each now in a couple weeks you can get the ITP Holeshot GNCC and i 100% promise they will be hooked up better than any tire ever made and only weighs 18 LBS.
-
I have a 2 into 1 pipe and silencer , no dents and no proublems just some surface rust , should clean up,,, 125.00 with free shipping , OBO , contact me at [email protected] .
-
i just got some Tusk brand Tie rod ends from RMATV they seem pretty nice and cheap.
-
i think that i found that it is a 32 mm . i should have tired the seach before i posted.
-
Can some one please tell me what size socket does the sprocket nut takes dont want to have to buy 3 different ones guessing . Thanks
-
just put a set of PTR mid range on my shee and the right pipe is hitting the coil on top . has any one had this proublem ? and what is the fix. this just like my first set of PTRs one side fit like crap and the other fit great.
-
now thats good info thanks.
-
what i am needing is if any one know how to slim down the wiring harness , I dont have any thing , no lights , no kill switch ( factory ) no tors. My last banshee had it done and was only like three or four wires . does any one know know to do this ? Thanks