DevilDriver

hey all, been off here for a while as i sold my 02 Banshee last fall. however money is flowing again and its time to find a new project looking to buy a stock or mild modified Shee in good condition. not worried about cosmetics as much as it being mechanically sound. year doesnt really matter but id like something with A-arms not the J arms. looking for a strong motor and straight frame mostly. smaller stuff like tie rods, ball joints, sprokets, chains etc i plan on replacing anyways. anyone know of anything that fits this bill in the $1500 or so range?? id be looking to make a move on something in the next month or so. i am out on long island NY working for the summer so somewhere in the surrounding area would be preferable. please post back or shoot me an email or IM. thanks and im glad to be back here in the banshee community.

BUMP new price $2000 this thing needs to go. please NO dreamers and NO offering $1000. ive had enough of these types write me already. thanks

BUMP

MrMooney, i dropped you a PM. best i could do to meet would be like west ohio, east wisconsin. if i drive somewhere its got to be close enough to dirve back the same day. if still interested write me via email and i ll send over some pics. everyone else, STILL FOR SALE i have pics available. help me get rid of this thing. it needs a good home. write me at for pics or with questions themanifestor7734@yahoo.com thanks

23champ, youve got a PM. drop me a line at themanifestor7734@yahoo.com and i can send you over some pics or anyone else who would be interested. thanks, Jason

hello all, buyer backed out because of problems of his own. Banshee is STILL FOR SALE help me out guys. a rippin Banshee needs a good home. dont let it be an orphan. email or PM with any questions. thanks all for looking

Banshee is sold, waiting for a reply to confirm is all. thanks everyone.

BTT price drop to $2300 OBO come on guys i gotta get rid of this thing. i just got hit with a big bill and need to sell this pig. it runs great, drives straight, and i can deliver. help me out guys it needs a good home.

ceramic coating like high temp paint RETAINS heat. does it retain enough to make a difference on a quad with an exposed engine? probrobly not. on cars and trucks it matters a bit more. even just a few degrees cooler can make a huge difference. on auto transmissions if you can drop the temp by even 10 degrees you will vastly prolong the life of it. hope this helped

post soem results when you get them. was thinkin of messin with mine too. thanks

time for a top end. mine did the same thing with the same simptoms. my comp was about 80-90psi at about sea level. after the rebuild it was 155 and it started up within 5 kicks. you may be able to cheat and go with new rings?? but id just bore it .020-020 and put some new pistons in it. you wont be sorry.

DV8... check out my post in for sale. ive got a 2002 banshee im gettin rid of. id trade you possibly if you were interested. the top end is fresh rebuild about 2 months ago .040 over with Vitos super stock +6 hp pistons. this thing is definately fun. add some pipes and C YA. it runs and rips but i dont have a title thats why im selling it as "parts bike" anyways, check my post out and if interested drop me an email or a PM and we can talk more. thanks

hey all, i just had some serious personal issues come up that require me to sell one of my toys. too bad the Banshee is it. 2002 Banshee blue plastics , no decals other than a vitos piston and snap-on tool sticker on the gas tank. top end was rebuild about 2 months ago bored .040 over and rebuilt with Vitos super stock pistons and rings. broken in properly. this thing runs like a beast. shee'll kick over 1st kick if its been runnin within a week. takes a couple if its been longer than a week or so. a modified air lid is the only other thing done to it. snorkel was cut off and a few holes drilled in it. E-brake has been removed and blocked off with a billet plate also. front tires are original with less than half tread and the rears are DirtDevils 22"tall 11" wide. it needs a set of rear swingarm bearings approx $35, and is getting due for a set of tie rod ends over the winter. the handlebars are tweeked ever so slightly lower on the left side then right by about 1/2". this quad was rolled before i owned it and was reassembled on a new frame. there is NOT a VIN number on the frame. thus i do not have a title for it. that is why i am selling it "as a parts bike". i bought it about 5 months ago and have wheeled the wee out of it this summer with no problems at all. runs like a beast and loves to throw sand. i ride on private land thats why i didnt sweat haveing a title for it. now, unfotrunately, i have to sell it. however, theres always room for a new project this winter. i also have a set of used Maxxis RAZRs not on rims that will go with the bike and also a set of +2" spacers and studs for the rear axle. that stuff will also come with the bike. im asking $2800 or best offer. i am located in Rochester, New York. i can deliver it within 150 miles from Rochester if your not local. email me at TheManifestor7734@yahoo.com with any questions or offers. thanks for looking.

lol dude that was funny as shit. i didnt think i was whining. more an issue of being a broke ass not a cheap ass. i spent most my money buying it then rebuilding it. ok i ll buy some pipes and do the suspension work. as far as the 40 over on an 02 i dont know its history other then the second time i rode it the motor shit the bed. a piece of one of the rings came apart and scraped the cylinder wall. i could have gotten away with 20 over probrobly but why not just open it up a bit more. besides ive still got another bore out or 2 if i need it. by then i ll probrobly be resleeving for a big bore kit anyways. yeah it sucks that i had to dump money into it as soon as i got but but now i know exactly whats in it and how the insides look. considering ive only got about $2000 total invested for a 2002 banshee with a fresh 40 over top end, no wrecks, good plastics, etc i think im doin pretty good. now its just a matter of getting another $2000 to dump on the mods i want and then i ll piss on the 450. hmm wheres that credit card app. thanks for the input.

ive got a 2002 banshee top has been bored 40 over and rebuilt with Vitos super stock pistons. i feel a bit more power but my friends on the 400exs with pipes and yfz 450s kill me out of the corners and on tight trails. its gettin to where im ready to dump the 410 pound banshee for a 350 pound honda 450 that pulls like a monster out of turns and on the trails. granted if i get any of them on a long straight away i can catch and pass them with no problem the 450 is close but enough lengh and i can get him. if i keep it i plan on a full exhaust in the fall FMF fatties or Gnarly some aftermarket reeds and possibly carbs. over the winter it ll get xtended A arms and dura blue in the rear shocks, etc , etc. what are the best mods for a banshe off the start line till it hits powerband?? thanks in advance for any suggestions