recomp

lol, it could be.

hey guys, There is this cool poster on Ebay with my banshee in it. Here is a link to check it out. http://cgi.ebay.com/ws/eBayISAPI.dll?ViewI...p;rd=1&rd=1 It also has other quads, but I think it looks good.

parts list. 2001 Yamaha Banshee 2001 Engine veto's +4 degree key Trinity Pro MX (Motocross) - Low-end / Mid-range combo Trinity Yamaha Banshee V-Force 3 Reeds Ronnie's 1 inch Reed Spacers Trinity CV 35mm 2 onto 1 Carb Kit Trinity Stage IV Pro Cool Head 18cc Domes .20 Over Stock Bore Wisco Prolite Pistons Toomey T5 Racing Pipe Kit K&N Open Air Filter Case Saver 14 tooth Front Sprocket Trinity heavy duty clutch kit 2003 Frame Powder Coated Gloss Black 2006 Full Flight +2 +1 A-arms. 2004 Tucker Pro Arm Round housing Barring carrier 2006 Barings all around Needle Swing Arm Barings Pep Steering Stabilizer Jenson Outlaw +1 +2 Steering Stem T-2 Tag Bars ASR Clutch Lever Cascade Chain Roller UPP Chain Guide Sidewinder 38 Tooth Read Sprocket Racing Chain Full Body Skid Plate DG Rear Bumper AC Pro Peg Nurf Bars w/Black Nets Jaws Mouth Front Bumper Motion Pro Cables Pro Armor Tether Switch Steel Brake Lines Front and Rear Elka Dual Rate Shocks with Res. Front and Rear Hyper Wheels w/Black Caps. RPM Rear Axle -4 +4 Maier Front and Rear Plastics Head Light covers Plus More. $6500.00 or BO E-Mail Me More Pictures Here

ThaNKS I am at sea level and have 18cc domes trinity mx port. THe pressuer I have is 187 and 189

Does anyone know what the compression should be in each cylinder? PSI?

I have my banshee up for sale. I would like to get $6000.00 for it Goto www.nysatv.com To see more about this sale. Albany New York Area.

Thanks alot guys. I update it a few times a week.

Hi guys. It has been a long time since I have been on here. I have been busy with my own site. www.NYSATV.com and racing my banshee. I just wanted to let you guys know that you can find all kinds of quad related videos and pictures on my site. I know how hard it is to find quad videos on the web so I started making my own. Let me know what you all think. Thanks ReComp; George http://www.nysatv.com ps. I like the new colors.

Here is a link to some shots i am working on.. http://www.nysatv.com/3_26_pictures.htm later

Got it thanks.

I just got my quad back together and took it out for a ride. It has been a few months since i adjusted the carb. I am not sure what could cause this problem. The problem is that when the quad is cold it starts right up and runs great. When it is all warmed up it seems to be lacking in the low end. zero to 1/4 throttle. When it is cold there is no hesitation at all only when it is warm. Also when it is warm and you shut it down and then tray to start it up again it takes a few more kick then when it is cold. I also have to chock it. Anyone have any ideas? I think it is the air screw, but i am not sure. What do you think? Thanks ReComp

I would like to rewire my banshee for MX. anyone know how? I saw on this site once that someone rerouted the cdi and all the other electrical parts to the front of the quad. Or? Is there a diagram I could use? Thanks ReComp

Alot of the videos i got from around the web and from here. Most of the rest we recorded from our races. Thanks for the congrats. There will be more up after the first of the year.

http://www.nysatv.com/NYSATV/random.php

I am still working on it, but you are welcome to visit and then let me know what you think and what it might need. thanks. If any of you would like to check it out here is the address. http://www.nysatv.com/videos.htm I have lots of videos and pictures of us riding and racing. My Webpage thanks ReComp

got websites? Thanks

I race mine in the NEATV-MX curcit. www.neatv-mx.com I want to get a port job done this winter. Anyone have a good place i could send it to? Thanks REcomp my web sites. www.nysatv.com

I need to send out for a good mx port job. Anyone have a place in mind? Thanks Recomp

I just got this 2 into 1 carb setup and I have a question that I hope can be answered here. On my stock setup I had intake spacers installed to help with the bottom end of the throttle response. Does anyone have them on a 2 into 1 trinity carb setup? Or can I use them with it? I want to install it today and forgot to call trinity this week and ask them. Thanks.

Hi. I am having soem questions on the caster and camber setting of A-arms. I think it is called "CASTER AND CAMBER" if it is not called that then it is the setting angle of the top to the bottom of the front tire. Also the setting angle from front to back of the arms. Does any one know the angles for mx racing? Thanks George

Hi I have a set of works shocks in very good condition for sale on ebay. SHOCKS FOR SALE ON EBAY CLICK HERE TO CHECK THEM OUT!!!!!!!

I see they put a plug for banshee hq in the may issue. In the WEB CORNER section on page 14..

I have t-5's and use 270 mains

No One??? NorthEast??? NY? MA? ME? NH? VT? CT? RI? PA?

well if she sits around the house and does nothing then you might want to get rid of her. But if she keeps the place nice and clean and has your food ready and your clothes washed you might want to get her something to ride or do when your out riding. Give her a username on here and tell her to start talking. I am sure we would like to here from her. later