KJ_S

I will let them go for $550.

Come on fokes!!!!!!

Anyone??????

No I'm not wanting to trade anything. Thanks though.

I have a set of drag ported cylinders that I am wanting to get rid of. They are 66mm. They come with blaster pistons. They are also polished. The cylinders was done by Southern Style Racing(Buddy Deville). The cylinders run 4.2's with a +200 pound rider. Make me an offer!

Lightening up your frame would help it out. A good swingarm is good to have. What kind are you running? A good set of Drag Ported cylinders. There is alot of stuff you can get that will help you out a lot, its just according to how much you want to spend.

I have a +6 over square tubing chromoly swingarm for the stock carrier. I will let it go for $185.

There is a nice set of cylinders over on planetsand for sale. They are polished and have stock port stock bore and are very sharp looking for $250. Just trying to help you out.

It will be a few days before I can send you a pic of the frame. No I don't have the title to it.

I will take $750 for it.

The cylinders can be resleeved. It is still a good deal on this motor. It comes with everything, carbs, intakes, everything you need except for filters.

anybody??????????????

I am parting out my bike. Here is some stuff I have for sale. Full Drag ported 350 motor. Motor has a Trinity coolhead, a HOTROD crank, polished clutch side cover. Everything wroks fine on it. Motor is very strong. The cylinders are 100 over. Front Brakes: $80 Stock Radiator: $60 Stock gas tank: $45 Stock reeds and intakes: $15 Stock footpegs: $20 +6 over Chromoly Swingarm for stock carrier: $185 1998 Yamaha Banshee frame: $350 Michelin Reggae Front Tires 130/90-10 on douglas wheels hardly used: $150 Stock Steering Stem: $50 If you have any questions feel free to ask.

well said quick 350. I just kinda turned into a little dispute but all that has been settled. Your right man, its about who you like and who takes care of you the most. I hope I will have my bike all back together before that race comes. When is it?

Southern Style Racing has good customer service. Buddy has helped me more than enough. I have called him like 10 times in a day asking questions and he has always had answers and told me to call back if I needed anything else. Great people to deal with.

I had some old pipes that I bought from a boy that was busted and had oil all over the damn place. It was burnt on to the pipe. I tried just about everything, until I found a can of Paint Stripper/Gasket Remover. I just sprayed it on there and that shit just started bubbling and I wiped a bunch of it off and some of it was still on there so I sprayed some more of it on there and got one of those wire brushes that has the little flat edge at the end of it, the part that you clean a barbecue grill with and just scraped it off and it came clean. Hope this helps. This is how I did mine, I'm sure theres other ways, this was just the easiest one for me.

Look here alcoholbanshee I'm not trying to start anything with you. What is your deal man? "And you said yalls Cheetha bikes", man I am 16 years old and have a Southern Style Racing 350 that I am proud of because to be 16 and have a drag banshee that will haul ass thats pretty impressive if you ask me and I have to pay my mother every damn month just to have it. So you if you want to catch an attitude with somebody you need to look elsewhere. All I am saying is that Southern Style Racing has some fast bikes. If it this satisfies you man I will say this for you," Grand River Racing is the best in world everybody" remember that. Thats all I have to say about that.

Hey enForcer you can choose who ever you want to build your bike. There is a lot of builders out there to choose from. The ones that have really proved their self to everybody as far as I know are: A&S Racing, Packard Enterprises, SOUTHERN STYLE RACING, Luke Benoit,GRR, and a few more, those are just the ones that came to mind. If L C performance doesn't come through on what you want, Buddy has had some experience with those 10mm. I have his # if you want to give him a call.

Buddy's triple just ran a 3.47. Thats why my engine builder is Buddy Deville at SOUTHERN STYLE RACING.

bump

Yea GRR has the record for 350s on nitrous, Buddy's is all motor. And A&S doesn't have the fastest triple, Buddy's triple just ran a 3.51 yesterday. I talked to him today and he said the track wasn't even right yet, he thinks he will get some 3.4's out of it.

well you know what I mean on the Lonestar parts, their stuff is too high priced if you ask me. I am wanting to get atleast $300 out of it. I didn't want to go that low, but I need to sell it.

Buddy Deville at Southern Style Racing is my engine builder. He has some of the fastest bikes around. One of the 350's he built holds the record for a 350 with a 4.04. Oh and his triple cylindered banshee has the world record for triples with a 3.51 and I look to see some way better numbers than that here soon. He is a very good person to deal with. He will help you in any way that he can.

Sorry, no can do. This is a high dollar swingarm. Lonestar sells theres for like $800 and up and this one is made better and its lighter than a lonestar. I am taking a huge cut on it.

Come on people! This is a nice swingarm.