bpreuss

haha i thought it up myself?lol no the pegs are exactly the same, its prolly just the pic

i have 14/40 gearing on mine. still has good top end pull and accelerates like a mofo. i might go down to a 13/40 though for a little more punch

i may be interested in the swingarm

here are the pegs and kickups i made a few weeks ago, they still need to be painted. whatta you guys think?? they work great!

ya i put a zip tie on it so it couldnt move, problem is that i live about 100 miles from an autozone ill try to figure something out

ok guys i need your help, i cannot get the brakes to pump up!! ive tried doing it the old fashon way, bought a 6$ brake bleeding kit of ebay, nothing works! im temped to take it to the stealer and pay 35 bucks to get them bled. no air comes out only fluid, i went through enuf fluid to take a bath in! but they are still spongy and only barely work. any ideas on what i should do?? these are front brakes by the way.

well i like to think that im good at wire feed, and my dad is awesome at wire feed and even better at stick, but we will most likely wire feed it. we have access to a tig welder in school but ive never done it before, i just feel safer wire feeding it.

at PEP is $450 with ZPS

ok if the pics work heres the crack and one more did they work???

1 time, 2 rarely, mine sat for 8 months with the motor out and with old gas in the cold weather it started 1st kick

ya im talking about powder coat, this is gonna suck, what should i do to cover up the bare metal? spray paint and clear coat??

why tig?? i dont have a tig and i dont know how to do it very well. i do have a stick welder and a wire feed mig. i will most likely mig weld it.

vise grip

Anybody have any ideas?????

well today i loaded the shee into the pickup to go riding at the gravel pit and i just ran a quick check on it and i found on the bar where the front motor mounts bolt to is broke!! its broke on both sides but only like half way around the bar, one is lower and one is higher, by dad said we should probably just weld them up instead of putting a sleave on it. it would be hard to use a sleave becuase the helicoils are right above it. also, im gonna hafta take off my p/c to weld it can it get any worse?? sorry for the long message, what should i do?