jrm312
-
Posts
101 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Everything posted by jrm312
-
hey lazy ass , grab a case of beer some sand paper and some polish and save your self money, id give ya some but my money tree is empty, lol we gotta do are case covers.still
-
im a rookie to banshees and i did it , only hard thing is you have to drill a hole throug the side of your carbs for the idle screw then grind or file done the side of the carb end to about 3/4 of an inch ,, its not to hard just take your time follow directions
-
my buddy has a set brand new rims he is willing to sell from his limited edition shee never used yet but a few pavments runs
-
are u talking about the marks on the top of the motor where the cable is , or is their marks on the clutch basket if so no i didnt ,where do they line up on the basket.
-
ok i just installed a barnett dirt digger clutch, i align the 2 points on the cable by the trans, now it goes into gear but it is still in neutral. why is this happening??
-
i checked my compresion and im at 149 psi with 22 domes so am i safe with pump gas it also col here about 35 degrees so does that change my compression from cold or warm. thanks for all the info i appreciate it
-
i just got my cylinders ported stage 3 port , i have a noss cool head,and timing plate, procircuit pipes modified air box, my ? is i still wanna run pump gas 93 oct, what should i set my timing at and what size domes 22 or 21, i live in michigan so im above sea level but i dont know how much.
-
i had that problem also. so i took off the air box and put the carbs on first, then i put the air box back on .its a little tricky puting it back on but it works.. hope this helps
-
dont know yet in the process of rebuilding upper end just bought your head on ebay and was just wondering if i could run 21 domes and what the difrence would be in power from 22 domes to 21 domes.. i live in michigan macomb twp
-
hey dlnoss can u run pump gas with 21 domes???
-
looking for blue tank shroud and grill in excellent condition
-
2001 banshee gearing for trail riding?? gearing for sand draging??
-
i got one on ebay aswell works great , i had to make a mount aswell because of after market rear grab bar,it fits on stock bar. i think??
-
thanks
-
if i got 33mm could i still mod more and run those carbs??
-
8hondo whats wrong with the pipes u got your banshee runs fine why mess with it??
-
can anyone help me with my question, i have 2001 banshee with procicuit pipes, noss head 22domes, bored over .20 , kn filter mild trail port, timing plate 2 degress, i wanna get bigger carbs what sixe should i get??????
