04Banshee

^^^^^

^^^^^

AC Racing Full Skid Plate -Powder coated red -Comes with all hardware $75 Rox PowerMadd Star Series Handguards w/Rox Billet Mounts -Brand New -Blue/White -Comes with all hardware $55

Well maybe it was the combination of both the 2into1 intake and the pipe. The guy I bought the quad from had it setup at Dynoport so I know the jetting was spot on. He was in and out of the shop many times to get it setup perfect. When i swapped pipes I couldnt believe the difference. The T5s hit so much harder in the whole rpm range. I dont have dyno charts but I had 3 others with me and we all rode back to back. Honestly I wouldnt mind trying pro circuits after Snop talks so highly of them. My buddy has a set but his quad is all stock so its hard to compare.

Im sorry but the dynoport 2 into 1 is straight garbage. If u havent tried another pipe, do it. I changed to T5s which are suppose to be a mid/top end pipe and it pulled so much harder off the bottom all the way through the powerband. Pulled off dynoport put on T5s. Same jetting, same day.. No comparison. I also run a single carb setup with a 35mm air striker. Runs perfect but Im debating on switching to pwk 28s....

Looking for a roundhouse -2 swingarm. LMK what u have. thanks.

Finally, hahaha. Thanks man. I have been looking for like a month now. I appreciate it.

I bought the banshee used and the guy said they were +3 elkas. As far as I know elka doesnt make a-arms. I have searched all over to see who makes them and I cant find anything. Someone please lmk. thanks.

^^^^^

thanks. haha. anyone?

I bought the banshee used and the guy said they were +3 elkas. As far as I know elka doesnt make a-arms. I have searched all over to see who makes them and I cant find anything. Someone please lmk. thanks.

Yea same with me. front 19" sand stars with rear 18" cheng shins

where is it in sturbridge? Is thier a site with more info?

With the sand star tires the front never slides out for me. So far these work best from what I used in the past. Their pretty cheap and use a lot less studs compared to a razr mx or holeshots. Like Banshee 268 said, they really dig into the ice.

I hear ya. I have a lake right behind my house. It gets rolled from the garage to the lake on 50ft of black top.. Too much hassle for tire wraps. If i get a pro set of ice tires or race competitive it would never touch pavement.

Tested out the banshee today on the ice. The sand stars seem to work real well...

I have the same setup. Well I had a dynoport now t5s. Changed from pj34mm to pwk air striker 35mm. Same jetting. Light porting etc. 190 main DEK Needle 3rd clip 52 pilot runs perfect.

Me and a couple guys would go. lmk the details. thanks.

I ordered a set of front sands stars im gonna try this year. Ill see how they hold up. But yea for the rear, the cheng shins are the way to go.

Has anyone tired the front sand stars? It would be nice since it would take a lot less studs.

Hey tricked, I was searching about Marcel Fournier and came across this site. http://www.marcelfournier.ca/index-en.php Seems like this is his new site but not sure... Heres some pics of the atv tire setups.

Thats what Im looking for. Interesting setup. It definitely worked for you no matter how u look at it. Keep the pics coming guys. Thanks.

funny i was looking at the same pictures. Thats where i got the idea to run 18" cheng shin. Everyone of them run them. The sand star fronts in one of the pics look pretty sick. I already have the razr mx so im gonna try them for now. Pmed you.

Either way im gonna stick to my cheng shin since I just bought them. tricked, for the fronts do u usually stud every knobby or no? Thanks.

Im looking for the best stud pattern for all around ice racing. I just bought a set of 18" Cheng Shin for the rear and 19" Razr MX for the front. Ill be using Kold Kutter screws, but whats the biggest screw I can use that wont go through the tire? For the pattern I was thinking just one screw per knob for the rear? Im not sure how crazy to go on the fronts. Maybe 3 rows with one screw in each knob. On my old banshee i used holeshot xcr and studded every knob front and rear and they worked well. Any help is appreciated. thanks.