outkaste

Hey, How much for the head and what would S&H be to Pa. 16335? Thanks

Hey, Lookin for a Dynoport or Motofast 2 into 1 pipe. Got one to get rid of? Let me know. OutKaste

Hey all, I need to know, is there ANY way to make the shee stear more easily? I feel like I'm driving around a mack truck. When I get on my buddies R, stearing is effortless. So, what can be done about? Or is this the nature of the beast and just gonna have to live with it? Thanks in advance. OutKaste

The best way to get the nut off is with an impact. Another way is to insert a newer penny (aluminum) between the gears to hold it. Please keep the flames low guys. I know that not everyone does it the penny way.

Sweetshee, Mine are the same way. And compared to my buddies 250R, that sucks! They also rattle me pretty good going thru the whoops and similar. Race450, What do you have to have for the shocks? Master of Faster, The arms are greased. I even made a set of delrin bushings and SST inserts before putting it back together. They have a nice fit. It's definitely the shocks. Thanks

BB, Yes. They are at the lowest setting. I go 195 lbs. and get the snot kicked out of me when trail riding.

Hey all, Finally got my shee done and runs like a Now the problem is the suspension. The front end is sooo stiff with stock 03 shocks. What out there can help me for a decent price? I don't race. Just trail ride. But, there has got to be something that can make it a better ride. Thanks in advance.

Hey all, I'm just finishing up the the engine and getting ready to put the Trinity set up on it. Wondering if you guys could give me a place to start jetting. This is what I have: .040 over Vito's cast power pistons stage 2 porting FMF fatty's 33 PWK stock head w/no mods will be running stock closed airbox Thanks guys. OutKaste

See? That's what I'm talkin about. You really shouldn't post something unless you know what's in it. I'm not going to go through the post and pic out what's wrong. There are better things to be doing. Like, building my banshee I understand that everyone is entitled to there own opinion but, you've got to expect some flack(sp) for it. It's political. It sucks. At least he's not sitting in the oral office with some inturn, cheating on his wife(that is, if she didn't know), and getting all jerked when he's caught. There I go again. Time to step off the soapbox. All's I'm saying is, check and make sure what you are posting before hand. And, even if you do, your gonna catch a little if it's a political post. Hopefully, no hard feelings. OutKaste

evil, If you take the clutch basket off of the gear, there are round pieces of rubber about 3/4" dia. It is, IMO, to take up some of the shock when shifting.

Hey Boonman, You should really check the facts b4 posting. A good portion of what you posted is Clinton that you're talking about. Another portion is what has to be done by someone with balls. The rest, unfortunately, is just politics. I'm not real thrilled about the spending and especially our people being over there. I've got some very close friends that have seen things that have scarred them for the rest of their lives. Still, it needed to be done. I also give the armed forces the highest amount of respect for dealing with what they must and continuing on. As for loosing jobs, I'm a toolmaker/moldmaker. All of our work is heading over to China daily. FWIW, just got laid off on Thursday due to this crap. I know W was responsible for the on going screwing of our work force. Also know who enacted NAFTA that started this whole thing. Do you? I do feel that W has cut his own throat though and will not be relected. But, you think things are bad now? Wait til we get another liberal in office. Not sure who all of you live in Commyfornia, sorry if you do. You have less rights than any other state and that is because of the liberal POS's that are in control. I could go on and on but I'll leave it at that. For now.

Hey guys, I'm looking for a couple of things and was hoping you could help. 1st is just an all black gripper seat cover. Looked everywhere and they all seem to have some color on them. Also, looking for the clutch rubbers (don't know what they are called). I've got a little play in mine and would like to fix it. Thanks in advance all. OutKaste

Sorry. The title should have read: YFZSR For those of you interested, there is a YSR with a shee pumper in it. http://cgi.ebay.com/ebaymotors/ws/eBayISAP...item=2455440618 This is a project I'm currently working on myself. 2nd place doesn't look so bad. Enjoy

FWIW. Whenever sending moneys for product, always use a postal MO, unless you're useing Paypal. It is a federal offense for defrauding while using a postal MO. Just some info for those who did not know and a thought for those thinking of rippin someone off.

OK, Sorry for the wait. Alltel SUCKS!!!!!!!!!!! Got some plastic for sale. Year unknwon. Front and rear fenders only w/seat. Purple with black/blue/yellow flame Alba Racing/Ceet graphics with matching seat. Go here to see it. http://users.stargate.net/~outkaste/banshee.html If you like it, make an offer. OutKaste