quadridermx

not spark arrested, sorry...

I don't currently have pics of the pipes... they are in great shape, I can guarantee that. Pipes and silencers go together. Or I'll sell you the pipes for $250 and throw in the silencers for free

FMF Fatty Pipes / Silencers in great shape, no dings or dents or cracks. Pipes are high-temp coated black and silencers are polished. Set looks great! Over a $500 system new... $250 Pro Design cool head in awesome shape. VERY shiny and looks just about new. Comes with o-ring set and domes, although I can't figure out what size the domes are. The guy I bought them from ran regular gas in the motor, so I assume they are stock size domes... $150 I have pic of the cool head, but no pics of the pipes yet.

97 Banshee roller for sale. Needs engine assembly, pipes/silencers, and wheels to be complete. Everything in pictures is powdercoated. Frame, spindles, and bearing carrier are powdercoated kawasaki green. A-arms, swingarm, and footpegs are powdercoated black wrinkle. Also other misc. parts powdercoated gloss black and chrome. Bike has pro design pro flow system installed and comes with renthal bars (not pictured). Stainless steel bolt kit and new bushings/bearings through the frame. The rest of the parts for the bike that aren't in the pictures I have in boxes. Again, it comes with EVERYTHING except for the engine, pipes/silencers, and wheels. Everything is perfectly straight and ready to go! $1000 for it all!! Buy this for $1000, and part it out for over $1500. Awesome deal here... I'm in Temperance, Michigan and can deliver within 150 miles for an extra $75. Email is [email protected]

$175 for the cool head... Almost new, and comes with o-ring kit. I have pictures of all the parts I have. Some have been sold, but I still have most of the main parts left. Tranny Clutch assembly Cases etc..

I still have complete motor besides crank assembly, cylinders, piston assemblies, and head. Although I do have a Pro Design cool head and FMF pipes/silencers for sale.

Banshee motor up for sale on Ebay... decided not to go through with my project, so the motor has to go. Here's the link: http://cgi.ebay.com/ebaymotors/ws/eBayISAP...=ADME:B:LC:MT:1

bump...

not sure about the size of the domes... does it say somewhere on them what size they are?

I have a complete runnable motor for sale, but I also have a 2nd parts motor that is in MINT shape minus the crank. This 1997 motor is completely torn apart right now. I have EVERYTHING for this motor except for the crank and top end. Clutch assembly is in pretty good shape. A some slight notching in the basket, but still definitely usable, and should work like new. Tranny is all together and in perfect shape. I also the whole rest of this motor including gears, water pump, crank cases, etc... $350 for all parts, or will part it out. If you need any motor parts, just let me know. If anyone needs parts, shoot me an offer, or send me an email and let me know what you want.

I'm selling a 97 Banshee motor for cheap. All stock except for a hinson clutch setup. Motor is a little dirty, could use a cleaning. Cylinders are stock bore in good shape, but I do not have pistons for them. I will include a .020 over Vito's power piston including rings, wrist pins, bearings, and complete gasket set for an extra $100. The motor is complete minus the stock pistons, and all gears work fine, everything turns over easily, but I have NOT had this motor running. I bought it recently for a project, but never actually got it in the quad and ran it, so I cannot warranty it, and just like any other used part, it is sold as-is. However, I was told it came from a strong-running bike. $650 without piston kit. $750 with piston kit $900 with piston kit, carbs, reed assemblies, and pro design cool head in new shape. $1100 with piston kit, carbs, reed assemblies, pro design cool head, FMF Fatty pipes (black), and polished FMF silencers. .020 Vito's complete top end kit... $100 Almost new Pro Design Cool Head with domes/o-rings, ready to be bolted on... $150 FMF pipes / polished silencers... $250 I ALSO HAVE A COMPLETE 2ND PARTS MOTOR MINUS THE CRANK!!! If you need ANY motor parts, I am willing to part this motor out.

I am in need of a solid, runnable, banshee crank and rod assembly. Willing to pay fairly for an assembly in great condition. Have cash!

Sorry, $900 is a tad bit low... My Geocities account doesn't allow very much bandwidth, so it shut down my site for the day. If anyone wants pictures, email me at [email protected] .

I'm selling a complete project banshee for $2200 obo. Engine needs new crank/rod assembly. It was running great before, but the crank halves began to separate slightly, so the entire engine was taken apart to make sure nothing was wrong. Motor is in EXCELLENT shape other than the crank. No damage was done. Transmission is mint, clutch is mint, cases are mint, everything is in great shape. It also comes with brand new .020 Vito's piston kit. The cylinders are still on standard bore (in good shape by the way), so they will need to be bored to fit the pistons. Aftermarket parts include: FMF pipes and silencers, vito's piston kit, pro design cool head w/domes, brand new bearings/bushings throughout entire frame, black/grey seat cover, pro flow intake system w/filter, front stainless steel grille. Frame and all parts are perfectly straight and solid. Frame is powdercoated Kawasaki green along with rear shock linkage, bearing carrier, hubs, and spindles. Front a-arms, footpegs, and swingarm are powder coated black wrinkle. Price to get running again: $200 or less for crank/rod assembly, $200 or less for wheels and tires. That is ALL this bike needs, everything else is there and ready to go. Engine is not assembled so the buyer can inspect everything to see it's all in mint shape. For around $2500, you can have a SWEET looking and riding bike that's probably worth over $3000. PICTURES ARE AT http://www.geocities.com/quadridermx/MY_TOYS.html . If you have any questions or want pictures, shoot me an email at [email protected] . I AM ALSO OPEN TO ATV OR DIRTBIKE TRADES!