quadridermx

I'm looking for any good dirtbike or 4-wheeler deal. I have cash and can get it to you fast. I am looking for just about any dirtbike, 4-wheeler, or project that I can get an awesome deal on. Maybe it needs a rebuild, fresh paint, new parts, etc... I've bought from quite a few people already that are happy to pass on a great deal to get some fast cash and get a project out of their hair, so let me know what ya got and I'll make an offer. Reply here, PM me, or email me at [email protected] . Thanks!

$1950 OBO

bump!

Pics at: http://www.imagestation.com/album/pictures...l?id=2115534417 I aquired this quad recently but decided to stick with dirtbikes. For it being an all original 88' it's in excellent shape. This is a RARE find! As you can see the original plastics are still shiny, the frame paint is in good condition for never being touched up (i did touch up the front bumper with some fresh paint), and even the original rims and tires are in great shape. Tires have about 50 percent tread left, but I was told these are the original tires and rims! Rims have a few nicks, but no bends and hold air perfectly. Motor purrs like a kitten. No bearing or crank knock, clutch is smooth, and compression is great. The only aftermarket part on this quad is a vintage aftermarket silencer that sounds very nice. Not very loud at all, would definitely meet a 90 dB sound level. $2000. I'm in Temperance, MI and can help with delivery up to 150 miles as long as buyer pays for my gas. Will also ship, but buyer must make all arrangements beforehand.

Bump... If anyone's interested, please send me an email directly at [email protected] . I'm not getting notifications when someone replies to the thread.

bump

I'd be interested, but halfway to Mass is still just too far a drive, especially with the gas prices now... thanks for the offer though!

Well it would only be about a 1.5 hour drive for each of us if we met half way... PM me if you're interested, I'm willing to meet halfway. I could deliver it the entire way if you'd chip in a little extra for gas. Lemme know..

bump! Will sell for $2500 if I have the cash in my hand soon. It will be going up for sale locally at the shops as soon as I get some time to make up some flyers. Still open for trades too!

2001 Bombardier Ds650 in excellent condition other than needing a set of tires. Even the original sales stickers are still in tact on the frame! Reason for tire wear is because it has mostly been ridden on paved and gravel roads for it's lifetime. I'll let the pictures speak for themselves. The quad runs just as great as it looks, and it flies! Has a mean sounding exhaust note too. Retail on this according to kbb is over $3700. I don't think it's quite worth that much, but I'm looking to trade for about anything off-road of similar value that I can ride for a while and resell. Banshee, 400ex, Raptor, Z400, etc... the more aftermarket parts the better. Will also sell for $3000 OBO and can deliver within a 200 mile radius for $.75 per loaded mile. I am able to ship, but buyer must take care of all arrangements.

Still have the rolling chassis... get a good banshee motor for $750 and you've got a nice banshee for $1500 or under!

I'm not really sure what shipping would be. I'm willing to ship, but it's up to the buyer to figure out the details, I just don't have the time.

Cylinders, Bill's pipes, and 2 into 1 setup are sold... I do still have the: Bottom end Rolling chassis Dynoport 2 into 1 complete system with silencer for $175

Everything must go!!! 1) Trinity 2 into 1 setup - $225 2) Bills pipes and silencers - $250 3) Bottom end - $375 The crank alone was over $500 and only run once! 4) Cylinders - $175 5) Rolling chassis - $725 These prices are competitive, if not better, than what you'd find on Ebay. Please help out a po' college boy!

Here are pics of everything! 2 into 1 system, DOES come with the slide and cable but it's not pictured Bill's pipes, DOES come with silencers but they're not pictured Bottom end with wiseco crank setup Cylinders w/head... these are ported. The guy I bought it from said they absolutely fly. Rolling Chassis... it's just loosely bolted together and there are a lot of parts *not shown in the pictures* but I do have everything else that's not shown in separate boxes .

Sorry guys! I wasn't getting any notification that I had any replies to the post. To answer your questions... I do still have everything, and the bottom end does come with the flywheel and stator. Sorry, can't part out the bottom end. However if someone bought the entire thing, they could make some decent money by parting it out. The $500 crank only has one ride on it! Broke, pics are sending right now... Holeshot, I'll give ya a call tomorrow. Again, sorry bout the slow reply! From now on, please email me instead of replying here. [email protected]

Picked up a 1990 Banshee in pieces that I'm parting out. This was a great running banshee before the previous owner took it apart and spent all the money on these brand new aftermarket parts only to loose his job before he could get it all back together. Here's what I have... 1) Trinity Racing Stage IV 2 into 1 complete setup - $275 This is just about BRAND NEW, in excellent shape, and ready to bolt on and go! Includes manifold, carb, carb to manifold boot, thumb throttle w/cable, and reed block w/reeds. The manifold and carb alone are selling for almost $500 on trinity's website. 2) Bills Pipes chrome pipes w/ silencers - $300 Again, pipes are just about BRAND NEW! No rust no dents barely even a scratch... in excellent shape and ready to bolt on. Silencers don't have any name on them but sound great, definitely aftermarket of some kind. Together these would retail for around $600 for the set. 3) Bottom end - $400 Comes with an almost BRAND NEW Wiseco Hot Rod crank and connecting rods. Crank and rods are PERFECT! Transmission is mint, clutch is good, all other gears are in good condition, side covers are perfect and very shiny. May be missing a few odds and ends, but price reflects that. NEEDS TO BE ASSEMBLED! This bottom end is in pieces, but you get everything I have including kick starter. Crank alone retails for over $500, and it's just about brand new. Add $100 for the cases, $75-100 for the transmission, $75 for the clutch assembly, and another $50 for misc parts and this is a squeal of a deal. 4) Cylinders w/head - $225 Fresh .050 bore. I don't have the equipment to verify .050 but they're definitely clean and ready to run. Cylinders are mint, head is good... both ready to go. Fresh black paint on the cylinders and head is very shiny and makes everything look brand new. 5) 1990 Complete Banshee rolling frame - $750 Chassis is just about spotless. It has some kind of tough blue paint on it that looks really good. Everything was coated correctly while the quad was apart and hasn't even been ridden on. Comes with: +2 axle DG alloy nerfs DG alloy front bumper Brand new black Maier plastics (older style) ITP rear rims with spider treks on back and holeshots on front Renthal bars Tether kill switch Ceet seat cover (the classic blue and white tiger stripe!) Aluminum rear grab bar 250r front shock setup Also comes with an excellent condition 250r rear shock to replace the stock banshee rear (worth an easy $150 alone!) Every bearing and bushing in the frame is brand new and perfectly tight. The front shock mounts on the bottom A-arms were relocated to accept 250r front shocks (already installed) which have much more travel and better overall action than banshee stockers. This would be an AWESOME rolling chassis to slap a streetbike or sled motor in. Or, since it's all still stock... put another banshee motor in and have a very nice banshee for under $1500. Prices as listed, or will sell the entire project for $1650. If you need pictures or have questions about anything just let me know! I may also be interested in trading the complete project (everything minus the pistons) for another running quad or bike... let me know what ya got!

Here's the link: http://cgi.ebay.com/ebaymotors/ws/eBayISAP...B%3ALC%3AMT%3A1 Here's the ad: Up for auction is a VERY clean and excellent running 2002 Yamaha Raptor 660R. This machine is a BLAST to drive! It is extremely torquey and fast, a great all-around machine. Extras on the 4-wheeler include: Powdercoated frame (blue) Polished upper a arms and back of swingarm (really shines!) Alba full exhaust jetted by Dyno Jet jetting Graphics Kit WB power filter Barnett clutch WB park brake block Razr2 fronts, almost brand new Razr rear K&K graphics & seat cover IMS direct shifter (no shift linkage, much firmer shifting) As you can see from the pictures, this Raptor is extremely clean. The swingarm/axle area is immaculate with no rust at all. The powdercoated frame really looks nice with the graphics kit and polished parts. The 4-wheeler will come with the stock headlights and any extra parts I have laying around. However, the quad will NOT come with the Elka front shocks as pictured, the stockers will be on it. Again, the Elka front shocks do NOT come with the 4-wheeler, but I DO have the stock fronts that will be installed at the time of sale. Overall this is an extremely clean, ready-to-ride 4-wheeler that will bring whoever buys it a LOT of fun. Shipping/Delivery: 1) Local pickup at my residence here in Temperance, Michigan definitely preferred! 2) If this 4-wheeler needs to be shipped (in the United States alone, no foreign shipping), the buyer is responsible for all shipping details. I can put it on a pallet and take it to a terminal near me if needed, AFTER full payment is received. 3) I will deliver within 200 miles for an extra $1 per mile. Payment: 1) Cash on pickup within 7 days of auction end definitely preferred. 2) Money Order or Bank Check within 5 days of auction end. Please no Paypal payments for something of this price, unless you are willing to throw in an extra 4 percent of the final value to cover extra fees. If you have any questions about the auction, feel free to email me at [email protected] and I'll answer them asap. Thanks for looking and good luck bidding!

Up for sale or trade is a 250r project that's just about finished.. What it has: Durablue adjustable axle Stocker rear shock rebuilt/revalved by PEP 400ex front shocks Paul Turner Pipe/silencer Polished AC nerfs Polished engine covers and head Stainless brake lines front/rear Aluminum bars KN filter w/outerwear O-ring chain Douglas polished aluminum rims all around (holeshots mounted, but a little worn) Motor is in excellent shape. Lots of compression, perfect shifting, good spark, etc... All bearings are tight and ready to go. This is an extremely nice bike. I DO HAVE THE PLASTICS! They are white and mint. Fronts are OEM race cut with new graphics, rears are OEM in excellent shape. What it needs: Carb. $50 (accidentally shipped it with some other parts it wasn't supposed to go with, I'm sure he's a happy buyer though) Front nosepiece $10 (lost it sometime during the rebuild) Price: $2250. I'm in Temperance, Michigan and can deliver within 250 miles for $1 per mile. Or come pick it up, either way works for me. I do have a set of rear beadlocks w/brand new turf tamers, a set of front douglas polished .190's with brand new rikens, and a set of front Ohlins shocks compression adjustable w/rez. Would sell the tire/rim set AND the front ohlins to the buyer for an extra $500.

2002 Raptor 660 - pictures at http://www.geocities.com/acarter920/raptor.html -Lonestar Racing adjustable axle -HMF full exhaust system w/spark arrestor insert -Almost brand new Maxxis Razr front/rear tires -Full skidplates -Rear Douglas Beadlocks -AC Propeg nerf bars -Stainless braided brake lines -Renthal handlebars w/billet clamp -Acerbis hand guards -PRM grab bar -K&N filter w/outerwear -FMF seat cover Make offer OR... Looking to trade for other 4-wheeler, dirtbike, or whatever. The raptor runs great, starts right up, and flies! I'm in Temperance, MI and can travel to meet for the right trade. Either PM me, respond here, or shoot me an email at [email protected] .

I have 8 frames for sale up on Ebay: 2 Banshee, 1 Blaster, 1 Warrior, 1 Lt500, 1 Lt250, 1 250x, and 1 Tecate 4 frame. Link: http://cgi6.ebay.com/ebaymotors/ws/eBayISA...&sort=3&rows=50 Or look under my ebay name: quadridermx

I have all kinds of quad parts for sale! I just finished up inventory on what I have. Go to http://www.geocities.com/acarter920/parts.html for a complete list. If you are interested in any part, have a question, or want to make an offer, email me at [email protected] . PLEASE DO NOT RESPOND IN THIS THREAD for inquiries about parts. Email would be much better. Everyone who has already PM'd me about parts, please send me an email. My PM box only confuses me and I can't keep track of who I've responded to and already dealt with. Thanks!

Yeah, I can definitely understand that. Most of the parts are 250r parts, I really dont have too many banshee parts besides a couple frames and some plastics and gas tanks. As of right now, I am still trying to go through everything and have somewhat of an inventory list. I will put the list up on a website for everyone to see, along with pictures of the parts lot as a whole. Should be done in about another week or so. If you're weary of anything, check my ebay user I.D: quadridermx or you can search for my email address: [email protected]

Huge Atv Parts Inventory Fs I just picked up a dealership inventory of used parts I'm selling. I have mainly 250r parts, but also banshee, blaster, warrior, lt250, 250x quadzilla, and atc parts. Including transmission parts, motor parts, 250r cylinders, plastics, frames, a-arms, swingarms, shocks, etc... I'm trying to get an inventory list of what I have and will eventually post it on a website. For now, just ask me if I have it. Most likely, I probably do. Shoot me a PM here, or email me at [email protected] for any parts you may need.

$3500 or trade. Would prefer trading for something + cash for the bike. Details and pic at http://www.geocities.com/acarter92086/yz250f.html