8HONDO

i have a next to new set i used ounce for the dunes . they fit rocket pipes. 3 inch diameter i think . make offer. can ship asap.

bump also have lowering kit for front and rear with blaster shocks

yes i have pics make offer. i was thinking around 150 for both front and rear

8500.00 is to much but thanks.

well can you get me pictures a price and contact information

looking for a 2 or 4 seat sand rail from the 2000.00 to 4000.00 price range

i have one shoot me an email for a price. [email protected]

i have a set of ice tires fron and rear on blue labels and a set of almost new sparky's for rocket pipes . make offer

still for sale. also have a set of front and rear ice tires for sale and almost new set of sparky's for rocket pipes

front and rear ice tires mounted on blue labels stock swing arm stock swing arm carrier stock stator cover stock pipes make offer

still for sale also forgot to add that it has a hot rod trued and welded crank

make offer??

main is at a 360 right now. ran a 400 n the winter. the needle is 3rd from the bottom.

or will trade for sandrail

1999 banshee: freshly powder coated red chrome swing arm, arms and rear suspension v force reeds milled head rocket pipes cut fly wheel .020 fresh top end lot's of billet boost bottle ported / polished timing advance plate sand tires, ice tires and trail tires all mounted on mitchel red labels. 4500.00 obo

stock what about needle clip position?

i am running a 1999 shee with cut head, port, polished, +4 timing, stock carbs , cut flywheel and rocket pipes. i had them running perfect in the winter but my jetting for summer is screwed. currently have 360mains, stock pilot and 1 1-2 on the air screw. 3rd from the bottom on the needle. the thing runs perfect on top but when i am running down low i get a terrible bog. could this be my needle position. if i am on the pipe it is great. but low end seems like i am getting to much fuel. what should i do with my needle clip?

looking for a set of sparky's that will fit on rockets.

need a set of sparky's that will fit on a set of rockets. i believe the inside diameter needs to be 3 inches.

i have a 1999 banshee i would possibly trade ya for. give me your email addy and i will send you pics. freshly chromed and powder coated

i got both call me 586-822-5226

stock stator cover also

stock bearing carrier uni filter swing arm linkage(both pieces) stock grill throtle cover and rear brak cover 2004 f350 marker lights. make offer must sell need the room also have stock pipes and swinger if needed.

i have a cut air box with the proflow adapter plater i will trade you. also includes k&n and outer wear

what ya got to trade