BansheeBuhl

I put 190 mains in it and adjusted the air adjustment. The clips are set at the bottom( I beliieve, we went by the climars book and adjusted them to the leanest setting to help the problem). If your out running hard and shut it off, the plugs are a tan brown in color. It only acts up on idle and midrange. I didn't check the pilot jets.. Could that be causing a problem. The mains I took out were 280's. BansheeBuhl

O.K. I'm still in the learning phase. I had Toomey T6's on my bike and switched it back to stock for my kid to ride. After changing the main jetting and adjusting the needle clips, I still can't get the midrange to run properly. I purchased the shee with the Toomeys already on so I am not sure if it has toomey needles (or if they exist). I thought I would ask the experts before I go and buy needles. Many Thanks, BansheeBuhl

I have a set of front sand stars that have less than 3 hours on them. They still have the nobbies on the tires. I believe they are 21 7 10's. I am looking @ $75.00 shipped if anyone is interested. This is for tires only. Send me your e-mail and I can send you pictures New price....65.00 shipped.

Everything is gone, thanks guys

Pipes and front tires and rims sold. Still have the rear tires and rims available

There is slight discoloration about 6 inches up the pipe. They don't even have 20 hours on them. Send me your e-mail and I will send you the pictures. Holyman I sent you the pictures of the rear tires.

E-mail sent

Toomey T6's pipes and silencers, excellent condition: $350.00 plus shipping Rear Kenda Viper tires 20-9 on gold rims decent tread rims are nice: $30.00 Front Dunlap tires on machine finish c-series 5 wheels. Clear coat shows some flaws. Tires have decent tread: $40.00 plus shipping PM me with an e-mail address and I will gladly e-mail you pictures. The Toomeys are not negotiable, the pictures should speak for themselves

I have a set of T 6's I'm pulling off in the next week if interested. Very low hours $350.00 I can get you pictures through email. BansheeBuhl

Done deal thanks HQ!!!

Get some shipping prices to area code 49437 so I can send you some money!!!

Just wondering if anyone has some mid pipes with the heat shields on them. I bought a complete exhaust on e-bay and I guess complete doesn't include the middle section So if anyone has some laying around and they want to part with them pm me with a price and see if we can strike a deal. Many thanks, BansheeBuhl

Hey looking for a price on the 2 into 1 carb setup. Let me know what your thinking!

Thanks Guys! This gives me some direction

My shee was just rebuilt 10 hours ago. The company that did the work milled my head and put toomey t6's on the bike. I have a k&n airfilter and a boost bottle, but if i'm not in the power band the shee is a dog. I ride mostly in the sand dunes so I don't know if I should change my sprocket ratio, go to a trinity stage single carb, or what. If anyone has any suggestions, please let me know. I went riding with a buddy the other day, and I almost enjoyed riding his shee completely stock. Thanks, BanhseeBuhl

I'm interested in some pictures of the banshee and the Warrior. My e-mail is [email protected]

Hey I am interested in your quad. Could you please e -mail me some pictures. Thanks, Trevor(BansheeBuhl) [email protected]

do you think the 2" extended swing arm makes a difference over stock?

Hello fellow Banshee brothers (and sisters where applicable). I just put sand star paddles on my shee, and the front end comes up non stop. I want to put an extended swing arm on to help keep the front down. I mostly ride in the sand, so I was hoping to get some good advice on which to buy. 2" or 4"? Will it drastically affect the way my quad handles, will it still corner properly? HELP!!!!!!! BansheeBuhl

bump

I have a 2002 Banshee for sale. It has FMF gold series fatty pipes and fmf silencers, and dg steel nerf bars. This baby fires up on the 1st or 2nd kick every time. It runs strong and has no known mechanical problems. I have to sell one of the two and this one has to go. It has a small crack on the right rear fender as seen in the photo. The zip tie fix is strong. I live in Michigan and will drive up to 100 miles to meet someone, or I could ship it. I am looking for $3200.00 and that does not include shipping. I AM NOT INTERESTED IN PARTING THIS MACHINE OUT. pm me if you have any questions. I will be putting this on e-bay in less than a week, and I would rather get a buyer from HQ because we're just cool that way! PM me for pictures, because I have no idea how to post them. Thanks, BansheeBuhl

"The House of Hair Will Kick Your Ass......So Crank This Mother UP!!!!!

WTF is "Bump"

Hey you still have the front shock covers and how much?

Dude nothin beats the 80's hairbands Long live Poison and the Crue