[kick starter troubles]

my buddy called me over to look at his banshee he said the kick starter was jamed...we took the side case off and the gear for the kick strter was over pushed into the case...when you push down the kicker it slides through the gear it suspose to grab and then it turns after it slides through ....

ne one know whats wrong??

thanks

shane

[RACIN CANADEGA]

yeah look out for cdw and klotz and watch out for those stock ex's they always seem to get you

[NOS?]

im goging to have to go with cdw on the one JBOMBR....i just dont know id you ready to take the next step and have nos...ive saw you ride before and you might want to work on your skills before you run with the big boys and put in nos

[n.o.s.]

i have it on my 400ex....and it is well worth the money.,..go with s wet system and i use it for flat track

[carbs]

what differences does a stock banshee carbs to a 33 pwk or any 33 make....is it worth the money to go with the 33 and what are all the differences..

thanks

shane

[Won't Start?]

do you have a teather switch casue if you do that messed up my spark..it sparked every tenth kick or so....so that could be it...

shane

[tires]

any one else

[tires]

Right now i have 18" holeshots...i love them and they are the best tire i have ever had.....the problem is in the beads as many as you may know.......they dont seal worth a crap.....especially when your running 3 psi......so the question is i need to a good traction tire that will seal good......i run on mostly hard pact and i race motocross......somtimes go in the sand/gravel pits but mostly hard pact and motocross....also any ideas for the front tire......are there any out there that are just like the mx holeshot front???

for rear tires i was thinking about the kenda knarly!

thanks

shane

[What Type And Size Of Carbs]

33 pwk...just installed some on a friends banshee and i couldnt believe it the difference that it made....but ive never rode one with 34 or 35 mm

[Cool Heads]

i also for got to say that i have 20cc domes if that makes a difference

[Cool Heads]

ok thanks guys...so can i run the gold gas at the gas station..the highest octane they sell at the pumps..and also DLNOSS im sorry i didnt buy a noss head...i really wanted to but my mom wasnt cool with the whole ordering with the credit card...sorry man!!

\thanks

shane

[Cool Heads]

I just installed my cool head last night....my banshee was sitting at 120 for compression and after i installled the cool head with 20cc domes it is now at 147 150 for compression....the problem is i just have stock pistons in there...can they handle this kind of compresion??

thanks for your help

shane

[Wheel Psi]

man your crazy....they prolly dont go flat cause you had so much air in them....but yeah 4-5 in the back...ive even ran 3 psi before and it was a bit low but works good

[Pipes Not Sealing Right]

for about a month!! you got to get hi temp

[Jetting Shee With Tommey T-6's]

ive been running 280s now for about 3 years and no problems..everyone says oh its gunna plow up and my plugs dont have ne white on them....and i race to with 280s

its fine!

shane

[Front Bumper]

yamaha makes a bumber that looks like the older style dg and this new one i have,,i cant explain it ill try to get a picture!!

[Cheap Mods]

i did that i just bought a gauge from canadian tire and cut my rad hose in half and put it in there....sattered a copper pipe on.....then put it back on with hose clamps and it actaually works awesome ..the only problem is that it takes the temperature of the anti-freeze not the head it self!

thanks

shane!!

[Axle- Slightly Bent After Accident]

i bent the one on my old ex before i had a shee and once you bend somethhing its not the same ne more..i say try it and see but moybe your better off getting a new one.,...unless your tight on money..but maybve try to bend it back then see how it holds up and go from there

thanks

shane

[T5 Fitting Problem]

i just got my new t5...i took them off to get ceramic dipped and they have a problem fitting where the front of the header meets the cylinder head......they dont go on flush..so they are croocked...ne sugestions

thanks

shane

[Which Ones!]

Pro circuits ahve no bottom end what so ever

[Damn Plastics!]

hey thanks guys i needed to know that too..my rear fenders have so many stress marks....

thanks

[Sputters]

i have no clue..could be fouled spark plugs..but i dont know alot about 2-srokes only 4..try postin in some other sections if you dont get any other replies

[Transmission Oil]

i use bel ray exl

[Painting Banshee Rims]

i had my back rims painted balck..and at first they looked so awesome then after about 2 weeks thaey chipped from rock..common this is a banshee...wheel spin king..ne ways and then just little stuff like changing tires really made the paint chip bad and it looked terribel after a while....ne wasy just a heads up...maybe you want to look into powder coating

thanks

shane

[Calling All Honda Rider]

i used to own a 400 ex....my brother still does we just put a 440 in it and a hot cams.....its well worth the money..thats all you need trust me

thanks

shane