SheeMX

I have a ported 68 bore, 58 stroke cub motor,New Clutch With VForce 3 Reeds, UPP Intakes and Mikuni TMX 36mm Carbs. Complete running Motor. Trade for a Stock Complete Running 350 with carbs ( No Junk) and $2000. Motor Made 92 Horse nd 53 tq on Gas with Shearer Pipes. Built by McCoys performance and Dyno'd at Adrenaline Powersports. I am going to a different motor and Dont need a cheetah in my duner. Pm me or email me at nurv@adelphia.net with questions.

Dont mind these jerks, here are aot of teenagers on here that cant control themselves. Did you get the coil to work?

Are you talkng about the plug wire coming out of the coil itself, or the cap coming off the wire.

I believe that there is no way to tell, as long as it works you are OK. I have seen 2004 ones that look worse than 89 ones. I wouldnt worry about it.

Somebody here wants to go fast

If needed I sure can

Nate McCoy " More-Torque" built me a 4mill cub setup and I have since decided to go to a bigger Motor for the Pikes Peak Hill Climb. The following is included: Ported Cub Cylinders 68 bore 4mm HotRod Crank, 1 Tank of Gas Billet Head with domes Pistons, 1 tank of gas on them 36mm Mikuni TMX carbs with cable and filters w/outerwears Stud extenders Everything you need for your banshee to rip. Price is 2000 dollars. Thats quite a bit off what this would cost you and you can have it in a week The setup will come from Nate McCoy Himself and you can even pay Nate directly if you like. Everything will be in perfect shape when it Leaves Nates Shop. This thing is a monster, You wont be dissapointed

Wow, Everybody is trying to discredit these pipes saying it is all hype and now you have the dyno sheets to prove it. I thin the real hype is with these "passion 25 port super duper motors" 80hp is aweful low for a 4mm. Hell i seen 350's on pump gas making more power. Maybe you should spend more time on your own work instead of bashing a pipe builder. You just proved your porting on a 4mm will only net 80 hp.

The shocks are sold

Sure do, I can email them to you. It says the pic is too big to put on here

200 + shipping. Off a 2004 riden a few times.

He used a dremel to adjust the ring gap, Not bore the cylinder

These are awesome. 99 dollars and they have a better fit and finish than the DG's I had on my banshee. Tusk gets a big thumbs up!

Buy them direct Click here

Friday they put them on the showroom