vussute

engine mods are nothing its stock and main jets are stock(200)

hey guys, Just put my carbs back together, started my bike and it starts beautiful. i have the idle screws set to about 3 full turns from closed and when i it idles it idles high and vibrates alot, then i click it into first and the idle drops to normal.....then i got powerband in 1st but not in the rest of the gears.someone PLEASE help and my carbs are very clean, its got brand spankink new plugs and fuel. Thanks in advance.

Fixed it!!!! Thanks anyway mate, the lead from where the throttle cable turns into two was pulling so i just had to play around with that. Im from Perth....ride at lancelin sand dunes etc....you ever been to perth/coming to perth?If u ever do post me and will take you riding!!!

2 and a half screws from shutis standard idle setup!

please help!!!!Any suggestions!!!!!

hey guys, one problem. I have got my carbs off and i have put one back on ( the one on the right) and the throttle is perfect and down but i put the left one on, screwed the top up and the throttle sits up as if i am pressing the throttle. My shee is stock and it would be greatly appreciated for all your help. Thanks in advance.

yeah just take it to a shop!!!!!duh! oh riding this holidays! BITCHES!!!!!!

preferably mounted so i can see what they look like proper and see if the tube is connected to the right hole.

i took them off to sell and i got to ue that money on other stuf. does anyone know where i can find a pic of banshee carbs on the net?

nah i checked the choke tube on and it was disconnected. Wher edoes it connect to?

is it one of the external tubes i would of had to taken off when i took the carbys off?

thanks guys.... wheres the choke tube? i didnt change anything in the carb exept the jets.

Hi, got a question. I recently took off my fmf sst pipes and the 260 jet screws and put back on my 200 jet screws and my stock pipes ( dont ask!) and now my bike wont kick over! Everything is back in, made sure screws were clean etc. My idle screws are set back to 1 and a half turns and once i roll started it and it started but then started to bog out and the response was not touchy and took a long reaction time after i pressed the throttle and took about 2 seconds to actually do something and then just bogged out! I got brand new spark plugs in it not even ridden on. any suggestions greatly appreciated. Thanks in advance.

crf and yzf are refering to two wheelers? i had the same choice and i chose raptor......best quad out there and you cant dis it until you ride one....they will piss on a banshee anyday....hint:if buy a raptor make sure you put a aftermarket pipe on it......very gruntful!!!!!!

was going to! but after i rode a ktm 2 wheeler!!!!MMMMMMMMmmmmmmmmmmmm!!!!!!!There so good!yeah anyway nah i own a two wheeler!!!!!