bluepartsman

Any ratio. Would prefer with straigtcuts included. Grooving and overall condition to dictate price. Don’t need pressure plate.

Pipes are fmf not T5

$125 shipped to lower 48.

Good shape not sure of the finish it’s like a dull chrome. No burns. No silencers. Shipped to the lower 48. PayPal only.

Will trade for 10mm trenched cases in good shape.

Came off my running bike. Carbs are in great shape, would need a little more cleaning for show quality. I did cut the stock springs shorter for easier pull, I have never had them hang up. I plan on selling them with the dgh needles but no main jet or pilot jet. $250 shipped for both carbs and I will cover PayPal fees (no gifting money). Sent from my iPhone using Tapatalk

The one that goes from the head to the top of the radiator. Looking for a stock one or an aftermarket one, black in color.

Did just that. Sweet quality with quick results. I highly recommend him for all your wiring needs. Sent from my iPhone using Tapatalk

Looking for a stock wiring harness. Doesn't need to be pristine but if you know it works that would be best. From model year 2000 or equivalent (square plug stator). No relocation items preferred but let me know what you have. Tail light plug. Stator plug. Light plugs nice to have but not necessary. I don't use TORS.

What are the details of the shocks?

I am still looking. Anyone find a set they put in the back corner or know someone who did?

I will buy a whole set of the trinity pipes, any one have them

Pm sent

I need from the mid pipe back. I have the BB mid pipe so SB silencers won't work. also would like the rubber pipe connectors if any one has a pair. mike

and I need the pipe from the silencer forward

I need the right side silencer and hanger.

SOLD and sent to to banshee SE

It does look bent in the picture but it is not. Can not find my messages any more with the new site. $25 shipped to USA not including Alaska, Hawaii or Puerto Rico. I can ship it out whenever depending on what you do. I will sell both for that price shipped

Not show quality but not bent or blown. Is this what you are looking for?

Black or polished either is good. Gotta be in good shape. Look something like these http://xfrproatv.com/xfr-extreme-fabrication-racing-pro-series-ii-xfr-nerf-bars-yamaha-raptor-660-matte-black/ Mike

The spacer that goes between the bearings in the front hubs. I need two of them.

$75 INCLUDING shipping to the lower 48 states AND PayPal fees. Do not gift payment. I ran this carrier for 3 years. Never failed me. I took it off to replace the bearings but never got to it before I went a different direction. The bearings never gave me trouble but to protect myself....PLAN ON REPLACING BEARINGS!

I sent a pm about the lsr +2 rear axle last week. Mike

long travel with the adaptors for stock length shocks?? Tie rods included?