ported, like new, low hour shee engine

[william r]

i built this engine so i could pull my other engine as a stroker, so i have 2 engines. the engine i am selling has ported reed cages with 2 stage reeds, vito's forged power pistons at 65.25mm, ported cyclinders, 4 dgree key, stator, aftermarket billet kickstart and dipstick, coolhead with 21cc domes, good clutches, no case damage. the engine has about 3 hours on it. so it is just broken in. also the engine was not ran hard till after 2 hours. also the carbs was ran just a little rich to keep engine wear to a min. the crank is a rebuilt oem unit with only the current engine run time. i am asking 1000+ shipping to you. the engine weighs 100 lbs so keep this in mind for shipping. the engine is located in los lunas, nm . copntact threw here or at [email protected]

[YamahaBanshee69]

i built this engine so i could pull my other engine as a stroker, so i have 2 engines. the engine i am selling has ported reed cages with 2 stage reeds, vito's forged power pistons at 65.25mm, ported cyclinders, 4 dgree key, stator, aftermarket billet kickstart and dipstick, coolhead with 21cc domes, good clutches, no case damage. the engine has about 3 hours on it. so it is just broken in. also the engine was not ran hard till after 2 hours. also the carbs was ran just a little rich to keep engine wear to a min. the crank is a rebuilt oem unit with only the current engine run time. i am asking 1000+ shipping to you. the engine weighs 100 lbs so keep this in mind for shipping. the engine is located in los lunas, nm . copntact threw here or at [email protected]

[/quote

 

 

 

 

can i have a pic send it to [email protected]

 

 

tx