jar banshee 01 Posted August 12, 2008 Report Posted August 12, 2008 just bored out banshee to 65.00 want to know how much to shave head to match the bore i think 0.030 is right not sure Quote
mdhc500 Posted August 12, 2008 Report Posted August 12, 2008 I think .030 is the most you would want to go based on what I have read on the HQ... Go for .020! Quote
jar banshee 01 Posted August 12, 2008 Author Report Posted August 12, 2008 thank you i wiil go for 0.020 should be safe always can shave more if need be. what kind of cc would i get out of it at 0.020 Quote
mdhc500 Posted August 12, 2008 Report Posted August 12, 2008 I dont know the math formula, but I know that many builders online offer head milling services. .020 is conservative and you can run pump gas, so if I had to guess I would say maybe 21cc's? stock is 22cc's so its going to be slightly better. You can get more agressive with milling if you address the squish band and squish height, etc... Research online... You'll find all kinds of stuff. Quote
mopar1rules Posted August 13, 2008 Report Posted August 13, 2008 go right to .030" off, you won't have problems. plenty safe @ 92 octane. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.