scroll24_7 Posted August 9, 2008 Report Posted August 9, 2008 I wanted to know if I could put together my bottom end without the circlip that go's in the cluch side bearing of my crank???? Will putting it together without it cause any future problems (I cant seem to remember were I put the circlip)???? Quote
Bansh-eman Posted August 9, 2008 Report Posted August 9, 2008 you want to make sure you put the clip in there. it will keep the crank from pulling out of place from the side load... Some bearings dont use them becasue of an oring, if you are not running a bearing like that use the clip Quote
scroll24_7 Posted August 9, 2008 Author Report Posted August 9, 2008 you want to make sure you put the clip in there. it will keep the crank from pulling out of place from the side load... Some bearings dont use them becasue of an oring, if you are not running a bearing like that use the clip Its a new Vito's stock stroke crank and the bearing looks the same as the stock crank (no oring), so I guess im gona have to find one of those circlips. Quote
Bansh-eman Posted August 9, 2008 Report Posted August 9, 2008 you didnt put two on one side did you? you only put one half on each side. Quote
scroll24_7 Posted August 9, 2008 Author Report Posted August 9, 2008 you didnt put two on one side did you? you only put one half on each side. What do you mean??? I dont understand. Quote
Bansh-eman Posted August 9, 2008 Report Posted August 9, 2008 you have two "C" clips. one clip goes on each side of the crank. You dont need to have two clips on ech bearing race. Just one "C" clip per side Quote
hntruckman Posted August 10, 2008 Report Posted August 10, 2008 does it have a clip on top and bottom or just one side? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.