ws6 Posted July 17, 2008 Report Posted July 17, 2008 i'm installing a pd coolhead with 21cc domes, pt mids,running a 2 into 1 setup with a khein 34mm carb, my elavation is 480' asl, just wondering if someone could point me in the right direction on where to have my jetting set at, the carb currently has a 185 main and 52 pilot and the needle on 3rd clip. just want to make sure i'm around where i should be with the correct jetting Quote
ws6 Posted July 17, 2008 Author Report Posted July 17, 2008 it's got to be an aftermarket needle cause the only markings i see on it say's 28V, it's keihin pe 34mm carb and i'm having a hard time finding a place that sells replacement needles and really don't know what the correct needle would be, eek,cgl..etc... so if anyone can help me out it would greatly appreciated p.s. bought the 2 into 1 setup off here so not sure what they had it set up for? Quote
Snopczynski Posted July 17, 2008 Report Posted July 17, 2008 it's got to be an aftermarket needle cause the only markings i see on it say's 28V, it's keihin pe 34mm carb and i'm having a hard time finding a place that sells replacement needles and really don't know what the correct needle would be, eek,cgl..etc... so if anyone can help me out it would greatly appreciated p.s. bought the 2 into 1 setup off here so not sure what they had it set up for? try a dek or an eek, or an eej. take the main to 190-195, and pilot to a 45 to start. Quote
Washburn Posted July 17, 2008 Report Posted July 17, 2008 try a dek or an eek, or an eej. take the main to 190-195, and pilot to a 45 to start. Im not sure what needel is in mine I know its on the 3rd clip though and I have a single PWK35 and Im running a 195 main and a 48 piolet at 1800 asl and its perfect. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.