help jetting question

[bansheesickness]

on a stock banshee what do i jet the stock cabs at for pro cricut pipes at sea level? i bought these used and dont know what to jet to i am going to put a kand n filter on it to

 

thanks for any info

[monster_energy06]

im running the same pipes at what i think is sea level. my set up is 240 mains, stock pilots, 2 turns out on air mixture screw ... also running pod filters.. mine has been running like this since the pipes were on. for about 4 years, i think. runs awsome, never blown. plugs look perfect also, nice carboard brown.. but dont take my word for it.... could be a good starting point. i say get 240s all the way to 270s in jet selection. try it out and do plug chops, and see whats best for u

Edited July 2, 2008 by monster_energy06