slc_hillshooter Posted June 23, 2008 Report Posted June 23, 2008 10MM stroker crank only 6 months old. Flawless condition, ready to run. Trued and balanced, the whole 9 yards! $650 Quote
BigRed350x Posted June 24, 2008 Report Posted June 24, 2008 115mm rods? What bearings? Looks like stock bearings, or am I mistaken? Quote
okbeast Posted June 24, 2008 Report Posted June 24, 2008 I thought 10mils had 120mm rods? Prolly not Quote
alcoholbanshee Posted June 24, 2008 Report Posted June 24, 2008 I thought 10mils had 120mm rods? Prolly not You can get a 10mil in any rod configuration you want 110 115 120 125 big pin, small pin, etc.....Just depends what your cylinder/ piston combo requires.......................but 115 rod is probably most common. Oh ya....bump for a good deal on this crank Quote
2bzy2p Posted June 24, 2008 Report Posted June 24, 2008 You can get a 10mil in any rod configuration you want 110 115 120 125 big pin, small pin, etc.....Just depends what your cylinder/ piston combo requires.......................but 115 rod is probably most common. Oh ya....bump for a good deal on this crank did you buy the crank from crankworks or have them work it? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.