Jump to content

Recommended Posts

Posted

hey guys i just got a new crank stock stroke hot rods. when i turn the flywheel with my hand it seems to have some play between the drive off the crank and the big gear on the back of the clutch basket. could this be my noise. i wouldnt say its alot of play but should there be any?. also could it be my cluch cushions. can they be replaced on the stock basket? i can move the gear on the back of the basket with my hand but its not overly to easy but it can be done. also when i put it together i just dumped ATF fluid in the tranny just to start it to see if everything was working right. then i was going to drain it and put in gear saver. but i only put a liter in. there should of been 1.7L but i ran out of atf so could the lack of oil make my tranny sound loud. it only ran for about 1 minute. then i tore it all back down and split the cases again but i just cant find any clear signs.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...