gumby6t9 Posted April 13, 2008 Report Posted April 13, 2008 Figured I would install my new rear sprocket while I'm waiting on my cylinders to get back from Flotek... Took a quick look at my manual and thought to myself "huh, those nuts didn't seem like they were torqued to 43 ft/lbs" but since the book says so I started at 20, then 30, 40, then tried to get to 43... that didn't happen. Upon further investigation I found out I was in the older section of the manual that covered the older sprocket carrier (the 4 bolt one...) the newer 6 bolt on is torqued to 17 ft/lbs. F-it. I'm done for the day! Quote
Screaming Yellow Zonker Posted April 14, 2008 Report Posted April 14, 2008 can you tap it out for a larger bolt? Or Heicoil it... Quote
okbeast Posted April 14, 2008 Report Posted April 14, 2008 Just drill those out, use a bolt/lockwasher/and nut...DONE. Quote
bada450r Posted April 14, 2008 Report Posted April 14, 2008 Just drill those out, use a bolt/lockwasher/and nut...DONE. what he said ^^^^^^^^^^^^^^^^^^^^^^^ Quote
gumby6t9 Posted April 14, 2008 Author Report Posted April 14, 2008 I got the studs out. Ordered new studs and nuts. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.