jonnyb Posted April 7, 2008 Report Posted April 7, 2008 Well we went to the gap on three banshee, Two servived. The trails were mostly ice, slush, snow and water. We made it pretty far for the sercomestances. About four hours of riding the bi@ach blew. The bad part is that I just had the top end completely redone last fall. Long story short after riding it one and a half times its never felt completey right. The bottem end has alwarys been a dog. When it was redone it had 292 jetts in it and felt like a dog so I changed them right before this time to 260 just like they way fmf suggest since I run fattys. It has also felt like its cutting out on the left cylender time to time, and just like it wasn't tuned. Still fast but after 3/4 of a days riding she blew herd a messed up noise and she just died. Got towed by my buddy like twenty miles and countless snow, mud, water, sand, and rocks blewn into my face and body. It was the coldest I've just about ever been. He towed me to Mckinnley bar. : Thank good beer and Jaaaggggeeeerr. :beer: Well tore her down today and a wrist pin thingy pin or what ever released from both sides of the right piston and killed the jugs,piston, head and got down into the lower end. It won't ever kick over with the top end off. :: THis sucks big time. If I have the bottom and the top gone and one jug this is going to cost me a fortune. I need help guys where can I get a Crank and pistons cheep. This SUCK BIG YOU KNOW WHAT. Quote
jonnyb Posted April 7, 2008 Author Report Posted April 7, 2008 Oh yah and my buddy won't shut up about some girl named Amber from the bar. I don't remeber that. :beer: Quote
jonnyb Posted April 7, 2008 Author Report Posted April 7, 2008 my story must have sucked. :shoothead: Quote
BansheeDan Posted April 7, 2008 Report Posted April 7, 2008 my story must have sucked. :shoothead: i have a set of trail ported stock cyls done by dan @ a&s racing there .040 over and will come with the pistons .....400.00 and the ride Quote
BansheeDan Posted April 7, 2008 Report Posted April 7, 2008 Got any pics? actually there still on the bike....... they have been bead blasted by dan @ a&S as well....... with t5's and an airbox on stock carbs made almost 70 hp if you would like more info you can call me at 517-881 5326 they have one season on them..... i will try to get some pics in the next cpl days when i get them off the motor Dan Quote
dajogejr Posted April 7, 2008 Report Posted April 7, 2008 Rode this bike in person, with my fat ass...for some simple ported cylinders, it hauls the mail and is worth every penny for this setup. Quote
BansheeDan Posted April 7, 2008 Report Posted April 7, 2008 Rode this bike in person, with my fat ass...for some simple ported cylinders, it hauls the mail and is worth every penny for this setup. thanks dave!!!!! i will be going tonight or tomorow to get the motor out of the bike and pull the motor down i will get yo pics asap Dan Quote
shanYE west Posted April 7, 2008 Report Posted April 7, 2008 This motor also ran 4.9's with stock carbs and CPI pipes... Thats moving for trail ported cylinders! Quote
jonnyb Posted April 7, 2008 Author Report Posted April 7, 2008 Actually Dan is going to do a complete rebuild on my shee. Didn't even realize he's the guy that did my buddies port job. I've heard Dan Halls name I think everytime that we've been riding. So thats good enough to me. Taking my motor from detroit to Dans place on wed. Can't wait to get it done right this time. Only problem is I"m not going to make to the dunes on the 18th Quote
jonnyb Posted April 7, 2008 Author Report Posted April 7, 2008 I guess thats pure luck running into Dan Hall. :biggrin: Quote
BansheeDan Posted April 7, 2008 Report Posted April 7, 2008 (edited) I guess thats pure luck running into Dan Hall. :biggrin: youll be lucky to have that motor back by the beginning of june from what dan told me last week his shop is 15 min from my house :biggrin: Edited April 7, 2008 by BansheeDan Quote
dajogejr Posted April 7, 2008 Report Posted April 7, 2008 It's Dan Hull...btw, not Dan Hall...Just an FYI! :thumbsup: Quote
jonnyb Posted April 8, 2008 Author Report Posted April 8, 2008 Whoops my bad I though you were dan HULL. My bad I just saw the number in your sig and called it. Thats funny, what ever at least I know his real name now. My buddy has the his reciept from 01 when he got his port,cpi inframes, head cut, and everything you need to go fast with. What a sleeper! Thanks for the Tip on everything. Quote
1996dragshee Posted April 9, 2008 Report Posted April 9, 2008 how bout memorial weekend? u plan on being at the gap then? i might have the trail shee back together by then and im gonna haul my kx 250 along with the drag shee :biggrin: Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.