dead end road, can't figure it out

[05Special]

After riding for a bit with out going WOT, the bike will load up and it sounds like it floods out the left cylinder. Just started doing it out of nowhere. Cylinder is soaked with gas in the exhaust. Tried rejetting with no luck. AFter going WOT for a few it will clear out. I changed the reeds thinking the pedals where stuck open but that wasn't the problem..I have still have stock carbs with the tors. Picking up a 2 into 1 soon.. I have a pro design head and was thinking mad the o ring between the two pieces of the head are leaking flooding out the cylinder, Could that be possible? Thanks guys

[wesw]

need to open your carbs and see what clip your needle is on and what mains it has.

 

310-340 are a good range depending on what mods.