Guest utleybanshee Posted March 23, 2008 Report Posted March 23, 2008 OK I HAVE A J FRAME BANSHEE AND AN A ARM ONE ALSO I BOUGHT 200 watt stator it has the newer end can i cut my old one off and put it on thenew 1 do i have to change anything else on the 4w... and when i got the j arm bike the lighs weren't working front nor back... i was told it was a bad switch but when i opened it up and checked for power it had power in the switch i jumped the connectors still nothin thanks... Quote
Bansh-eman Posted March 23, 2008 Report Posted March 23, 2008 yes you can just swap the plugs and it will be fine. if your lights are not working check and make sure your voltage regulator is hooked up. if not you might have blown the bulbs Quote
Guest utleybanshee Posted March 23, 2008 Report Posted March 23, 2008 and there is the a way to add a brake light to the older model banshees thanks for the info again.. Quote
Bansh-eman Posted March 23, 2008 Report Posted March 23, 2008 you would need the switches or you would need to swap for a newer harness that has all of that on there already. Quote
ClimbAnyHill Posted March 25, 2008 Report Posted March 25, 2008 I have the rear brake light actuator for you if interested. Have the harness wires attached to it as well. Let me know if interested! Quote
Guest utleybanshee Posted March 26, 2008 Report Posted March 26, 2008 im interested in the actuator how much? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.