98_banshee_newbie Posted March 21, 2008 Report Posted March 21, 2008 Hey guys I am just about to intall my new engine and had a question what type of jetting should I gbo with. 64.75 mm piston kit fresh bore true and welded crank heavy duty clutch springs adjustable stator timing plate Toomey T6's stock carb's Everything else is stock And I am appr. 600-800ft above sea level Thanks guys Quote
r_flagel222 Posted March 21, 2008 Report Posted March 21, 2008 (edited) Hey guys I am just about to intall my new engine and had a question what type of jetting should I gbo with. 64.75 mm piston kit fresh bore true and welded crank heavy duty clutch springs adjustable stator timing plate Toomey T6's stock carb's Everything else is stock And I am appr. 600-800ft above sea level Thanks guys imo...... tear it back apart and have it ported. thats the way! sorry to say that but, thats how i see it. mine had every thing yours does except it had a trinity tt port job and k&n pods and i ran 330mains, 27.5 pilots, and stock needles 3 clips down and timing was at +5.............. good luck with the jetting! Edited March 21, 2008 by r_flagel222 Quote
98_banshee_newbie Posted March 21, 2008 Author Report Posted March 21, 2008 I have a spare motor that I am about to start rebuilding and that's the one I am gonna port and spend the money on this engine is to get my four wheels moving again. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.