mickrmoore Posted March 21, 2008 Report Posted March 21, 2008 Hey I just got the pro design pro flow air filter system. I did some searching on it but could not find what i was looking for. I removed the lid and installed it but kept the lid off after the installation. It seems like it sucking alot of air. Is this good or bad? should i put the lid back on? The only mods I have are FMF Fatties. Any help is appreciated. Quote
bansheejoel Posted March 21, 2008 Report Posted March 21, 2008 thats the whole point in upgrading is to get more air flow, besides the stocker being junk! Quote
mickrmoore Posted March 21, 2008 Author Report Posted March 21, 2008 Do i change the jetting or is it fine like that? Quote
man27 Posted March 21, 2008 Report Posted March 21, 2008 You have to read the plugs.... I would say that you will need to change the letting unless you were running it too rich to begin with so, don't run the bike to much without checking the plugs!!!!!! :: :thumbsup: Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.