baddsheee Posted February 21, 2008 Report Posted February 21, 2008 Just wondering if anyone would know what the nitrogen PSI should be for a rear stocker & YFZ front shocks? Got a buddy coming over this weekend that has a gauge & nitrogen to set his shocks for a buggy, and want to check mine. Quote
Bansh-eman Posted February 21, 2008 Report Posted February 21, 2008 George. My Marvin is set to like 600 psi. Try that and see how well it works. ither ay with that long ass swinger you got now you need to revalve that thing! Quote
baddsheee Posted February 21, 2008 Author Report Posted February 21, 2008 (edited) George. My Marvin is set to like 600 psi. Try that and see how well it works. ither ay with that long ass swinger you got now you need to revalve that thing! Hey Greg, The shock is going to get revalved, but don't know if I'm keeping the +6 or geting a +4. I might put it up and see if someone wants to trade. I was thinking of getting my shock setup for a +4 at the time and running it on the +6 until I get the +4. Edited February 21, 2008 by baddsheee Quote
dajogejr Posted February 21, 2008 Report Posted February 21, 2008 ON Marvins you use PSI to stiffen or soften them. Not on stockers... Get a stiffer spring and change your valving if you're going to run a longer swinger... Put the Nitrogen PSI where it's supposed to be at from the factory (I'm not sure on that number) I run 1500 PSI in my Marvin, but I sure wouldn't recommend that to someone with a stock style or even YFZ style shock... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.