typhoon1911 Posted February 18, 2008 Report Posted February 18, 2008 (edited) I saw that on the Direct Drive quick change clutch cover they delete the vent that is below the water pump. Is this vent necessary? Thanks, Alan Edited February 18, 2008 by typhoon1911 Quote
mickk Posted February 19, 2008 Report Posted February 19, 2008 Isn't that where the oil pump was installed on rz350 motorcycle that the engine stems from? I suppose you won't need it. Quote
typhoon1911 Posted February 19, 2008 Author Report Posted February 19, 2008 Isn't that where the oil pump was installed on rz350 motorcycle that the engine stems from? I suppose you won't need it. Thanks for the reply... I suppose not. I'll just plug the other end of the line. Quote
NitroTate Posted February 21, 2008 Report Posted February 21, 2008 Hey so I have the same question about that line, I'd like to eliminate it if I can... Any GURU's input would be much appreciated... I'd like to just plug off the nipple under the cover and not even have a line coming out of the cover... HELP!!! Getting ready to reassemble motor!!! :biggrin: Quote
NitroTate Posted February 21, 2008 Report Posted February 21, 2008 BUMP for some heeeeellllp!! :biggrin: Quote
Bansh-eman Posted February 21, 2008 Report Posted February 21, 2008 its not needed. you can either plug it or epoxy it or what ever. just remember your going ot have that small hole where the hose comes out. but the vent isnt needed. Quote
NitroTate Posted February 21, 2008 Report Posted February 21, 2008 its not needed. you can either plug it or epoxy it or what ever. just remember your going ot have that small hole where the hose comes out. but the vent isnt needed. Cool, that's what I was hoping to hear and pretty much figured anyway. Thanks! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.