inthemail Posted February 5, 2008 Report Posted February 5, 2008 no porting, could use a hone before you drop new pistons in. the head has a bit of damage on the right side from a bad blow up before i owned the bike. could be rechambered. both jugs and head will be media blasted ill trade them for bars, a roundhouse swinger, billet pieces, a bumper, a wave rotor. just ome ideas. Quote
BigRed350x Posted February 5, 2008 Report Posted February 5, 2008 no porting, could use a hone before you drop new pistons in. the head has a bit of damage on the right side from a bad blow up before i owned the bike. could be rechambered. both jugs and head will be media blasted ill trade them for bars, a roundhouse swinger, billet pieces, a bumper, a wave rotor. just ome ideas. so you have re-sleeved stockers or cheetahs or twister cylinders or what? 75mm bore is getting up there. Quote
gumby6t9 Posted February 6, 2008 Report Posted February 6, 2008 I think he means .75mm overbore.... :shrug: Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.