serius4play Posted January 30, 2008 Report Posted January 30, 2008 OK ...iv tryed sercing for this question already and cant find what i wont to know so yea dont bitch me out cuzz im a noob with stupid ass questions. OK i have some 38mm PWK carbs an im eather getting shears or CPI in frame small boar pipes. and i was wondering if the jet kit that comes with them will work in the larger carbs and have the proper fule to air mixtuer and not make my bike run like ass nod good! oo and burn a hole in my piston'S yea that...not so good eather.... soooo u think it will work or not?????????????????????? HEEEEEEEEEEEEEEELPPPPPPPPPPPPPPPPPPPPSSSSSSS!!!!! Quote
BaNsHeeJuNkEy Posted January 30, 2008 Report Posted January 30, 2008 what do you have done to it and rough elevation and we coulf tell you roughly were you should be. Quote
Dave I. Posted January 30, 2008 Report Posted January 30, 2008 I didnt know shearers or cpi came with a jet kit. But your jets out of your stock carbs wont work for pwk if thats what you are trying to do. Quote
530grafix Posted January 30, 2008 Report Posted January 30, 2008 Yeah That, and That too! we need more info to help ya! Quote
serius4play Posted January 31, 2008 Author Report Posted January 31, 2008 ok umm i have .20 overboar, ported and polished, and im runnin between sealeveal and around 750ft (home) Quote
530grafix Posted January 31, 2008 Report Posted January 31, 2008 ok umm i have .20 overboar, ported and polished, and im runnin between sealeveal and around 750ft (home) Im at 60ft asl when i had a drag port on stock cylinders and stock crank and 35mm pwks i ran a 155 main and a 48 pilot. If that helps Quote
shanYE west Posted January 31, 2008 Report Posted January 31, 2008 ok umm i have .20 overboar, ported and polished, and im runnin between sealeveal and around 750ft (home) Whats the temp that you'll be riding in? another key factor when Jetting. Quote
dajogejr Posted January 31, 2008 Report Posted January 31, 2008 Please list all your mods, air box/filter setup, pipes...etc. Rider Weight, elevation, temps you ride in.... Quote
serius4play Posted February 1, 2008 Author Report Posted February 1, 2008 Please list all your mods, air box/filter setup, pipes...etc.Rider Weight, elevation, temps you ride in.... guna get Shears pipes, and i have no air box, special made K&N filters, i weigh 180lb, riddin in temps around 45-70degreez F.... .20 over boar, 35mm PWK carbs, dune port and polish, Quote
serius4play Posted February 1, 2008 Author Report Posted February 1, 2008 guna get Shears pipes, and i have no air box, special made K&N filters, i weigh 180lb, riddin in temps around 45-70degreez F.... .20 over boar, 35mm PWK carbs, dune port and polish, oo and i have a aftermarket crank but its still the same stroke (dont think it matters but id tell ya anyway) Quote
BaNsHeeJuNkEy Posted February 1, 2008 Report Posted February 1, 2008 ok i say start with 48 or 50 pilots and air screw 1 1/2-2 tunrs out. 155 or 158 mains to start. don't know what needle you have but put it at 3rd clip. also post what needles you are using. also if u have never jeted before look in the jetting and exhaust section at the top and read the jetting topics on how to they will help you a lot they helped me a lot. along with a bunch of help from soem ppl on here. if any one has info on what i put they will let you know. but only tune one cricit at a time to make it easy get it to ideal frist. and good luck. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.