shanYE west Posted January 25, 2008 Report Posted January 25, 2008 I need some custom A-arm bushings made.. Does anyone know where I can have them made or a place that stocks a bunch of different sizes? Quote
Bansh-eman Posted January 25, 2008 Report Posted January 25, 2008 are you talking about the delron bushings that go in the a arms where they bolt to the frame? if so i got a bag of like 12 of them. they are the standard size one. i bought them a long time ago and never changed them out Quote
shanYE west Posted January 26, 2008 Author Report Posted January 26, 2008 are you talking about the delron bushings that go in the a arms where they bolt to the frame? if so i got a bag of like 12 of them. they are the standard size one. i bought them a long time ago and never changed them out yeah them are the ones I'm talking about but.. I need cutom ones made.. The banshee bushings are too small. Quote
FireHead Posted January 26, 2008 Report Posted January 26, 2008 I need some custom A-arm bushings made.. Does anyone know where I can have them made or a place that stocks a bunch of different sizes? Give Jeff at JJ&A a call. He would be my choice for such things. He'll probably charge you a bit more for the custom stuff, but atleast it will work when you get them. :geek: Quote
differentstrokes Posted February 7, 2008 Report Posted February 7, 2008 Go to atvriders.com and pm member "x.system", he'll probably be able to help you out. I think he can custom make just about any size bushing you want. Quote
racer Posted February 7, 2008 Report Posted February 7, 2008 I can make some delrin bushings, what you need? Hell, I can make them from pure teflon if you want. Quote
shanYE west Posted February 7, 2008 Author Report Posted February 7, 2008 (edited) I can make some delrin bushings, what you need? Hell, I can make them from pure teflon if you want. I need flange bushings for my a-arms. Delrin is fine. Exact measurements that I got with my caliper is Flange OD 1" Flange thickness is .053 OD is .872 ID is .38 I'm not sure what the conversion is into fractions. I dont have the bushings handy to double check them. Edited February 7, 2008 by Fouledout421 Quote
racer Posted February 7, 2008 Report Posted February 7, 2008 fractions are for queers. think you could get me a print or drawing of sorts? I'll try to make them on friday. 1 Quote
shanYE west Posted February 7, 2008 Author Report Posted February 7, 2008 (edited) I need 16 but wouldn't mind 18 for a few spares. I'm not the best at making drawings.. How detailed did you need it? is this good? lol Edited February 7, 2008 by Fouledout421 Quote
shanYE west Posted February 7, 2008 Author Report Posted February 7, 2008 (edited) for some reason all the lines dont show up untill you view full size.. :shrug: I really appreciate any help on this!! I've been talking to a few bearing companies and they really dont like to sell just a few.. they want to sell thousands.. So they've been making my life hell lately. Edited February 7, 2008 by Fouledout421 Quote
racer Posted February 7, 2008 Report Posted February 7, 2008 That's perfect. You on a timeline? and what size is the flange? cause 1/16 is not .053, ha. Quote
racer Posted February 7, 2008 Report Posted February 7, 2008 one more thing, what kind of tolerances you lookin for? + .005 good enough? Quote
shanYE west Posted February 7, 2008 Author Report Posted February 7, 2008 (edited) Flange outer diameter is 1" and the thickness is supposed to be 1/16". I think it compressed overtime. Soon as possible. how much is this going to cost? Edited February 7, 2008 by Fouledout421 Quote
shanYE west Posted February 7, 2008 Author Report Posted February 7, 2008 (edited) one more thing, what kind of tolerances you lookin for? + .005 good enough? lol shit.. i dunno? sure sounds good! lol I was thinking might have to jump the OD up abit for a better press fit. maybe .875 Edited February 7, 2008 by Fouledout421 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.