tnr Posted January 17, 2008 Report Posted January 17, 2008 I am just getting done with my first banshee. I took out the top end and had a mild port done, bored the cylinders .20 over, added wiseco pro lite pistons, and lightened the flywheel. I also added boyesen dual stage reeds. These are the upgrades I have a question about for the jetting. The bike already had toomey t-4's, 4 degree advanced timing, shaved head, and 30mm oko's with k&n's. Before he was having electrical issues it was running really strong. He had a 130 main jet, a 50 pilot, and the needle set at the third notch. So after the additional crap I did, can anyone get me in the ballpark of where to start. This is my first bike and the minute I got it, I tore it apart, and I really dont want to tear it apart again so soon. Thanks for your help. Quote
TexasBansheeMan Posted January 17, 2008 Report Posted January 17, 2008 I am just getting done with my first banshee. I took out the top end and had a mild port done, bored the cylinders .20 over, added wiseco pro lite pistons, and lightened the flywheel. I also added boyesen dual stage reeds. These are the upgrades I have a question about for the jetting. The bike already had toomey t-4's, 4 degree advanced timing, shaved head, and 30mm oko's with k&n's. Before he was having electrical issues it was running really strong. He had a 130 main jet, a 50 pilot, and the needle set at the third notch. So after the additional crap I did, can anyone get me in the ballpark of where to start. This is my first bike and the minute I got it, I tore it apart, and I really dont want to tear it apart again so soon. Thanks for your help. slow jet is close. Main I would run 150-158 Call CPW ant tell them your mods They will put you spot on. Quote
tnr Posted January 17, 2008 Author Report Posted January 17, 2008 Thanks for the info. I will let you know how it goes.. Quote
TexasBansheeMan Posted January 23, 2008 Report Posted January 23, 2008 I have delt with them several times and they are good guys. Always have an answer to your question and just nice people. Never had a problem with CPW. Quote
woodro77 Posted January 26, 2008 Report Posted January 26, 2008 I have delt with them several times and they are good guys. Always have an answer to your question and just nice people. Never had a problem with CPW. i have delt with them too and they are good people , i bought a set of 30mm oko's and the jetting wasnt right so i called them and they sent me new needles and jets for free . and helped me with the jetting over the phone . Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.