pollardhimself Posted January 15, 2008 Report Posted January 15, 2008 (edited) I believe i discovered what pistons i have the wiseco 513P4 Size: 65.0 mm Bore x 54 mm Stroke am i correct? any idea on the and rods the both have 29L marked on them?? Edited January 15, 2008 by pollardhimself Quote
91banshee Posted January 15, 2008 Report Posted January 15, 2008 I believe i discovered what pistons i have the wiseco 513P4 Size: 65.0 mm Bore x 54 mm Stroke am i correct? any idea on the and rods the both have 29L marked on them?? thats a stock crank Quote
pollardhimself Posted January 15, 2008 Author Report Posted January 15, 2008 thats a stock crank alright thanks Im new at this just started rebuliding this one. Also whats the max you can bore without using sleeves on these engines Quote
91banshee Posted January 15, 2008 Report Posted January 15, 2008 alright thanks Im new at this just started rebuliding this one. Also whats the max you can bore without using sleeves on these engines if you are at 65 you can go to 100 over Quote
inthemail Posted January 15, 2008 Report Posted January 15, 2008 those pistons dont even look bad. just rebuilding to see if you can? or what the deal Quote
BigRed350x Posted January 15, 2008 Report Posted January 15, 2008 If your planning on boring it out for more power, ditch the idea. Save your over-bores for when you need them. Quote
pollardhimself Posted January 15, 2008 Author Report Posted January 15, 2008 If your planning on boring it out for more power, ditch the idea. Save your over-bores for when you need them. well the cylinder walls look a little ovaled ill get a bore gauge when i cant and check them Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.