chevytrucks84 Posted January 11, 2008 Report Posted January 11, 2008 (edited) i got a 2000 banshee all stock. i got it in parts the piston skirt broke off the pto side, is the craink bearings good or should i change them it has been apart for about 3 years. what are some good mods to do to it. like tors removal what about the clutch rod and ball i want a mild port job, and i started but would like some advice on that, its going to be riden in the sand and on the trail going for reliability Edited January 11, 2008 by chevytrucks84 Quote
Hilarious Posted January 11, 2008 Report Posted January 11, 2008 i got a 2000 banshee all stock. i got it in parts the piston skirt broke off the pto side, is the craink bearings good or should i change them it has been apart for about 3 years. what are some good mods to do to it. like tors removal what about the clutch rod and ball i want a mild port job, and i started but would like some advice on that, its going to be riden in the sand and on the trail going for reliability. I'd do another 4mill stroker w/ a dune port. Quote
chevytrucks84 Posted January 13, 2008 Author Report Posted January 13, 2008 any advice for a new guy. good ways for a do it yourself port and polish, good parts, worthless parts, thank you Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.