jesse1004 Posted January 2, 2008 Report Posted January 2, 2008 I recently put steel brake lines going to my front brakes. I blead out the brakes after about an hour of dicking with it, and now i notice that i have good brakes but they seem to not wanna release(the right more than the left) I dont know if they were like this before but i can hardly turn the hubs with my hands. is this normal? if not what do you think the deal is? Quote
Screaming Yellow Zonker Posted January 2, 2008 Report Posted January 2, 2008 Nope that is not normal. Crack the bleeder and close it with out touching the brake lever. then try to spin the tire. if it spins it is a line problem. If it doesn't than it is a caliper problem. If your front brakes worked before than I would assume it is a line problem. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.