2-1 setup jetting

[2strokepat]

I have a 2-1 setup with fmf pipes boysen reeds and a 35mm carb and a pod filter. were should I be with jetting at 500ft.thanks for some help.

[Snopczynski]

Which fmf pipes?

[2strokepat]

Which fmf pipes?

 

 

FmF fatty with power core 2 and I didnt mention but there is a 47 for a piolit jet. It seems to bog at 3/4 the needle is in the first clip. it seems to never reach the power band.

[letsgetthisdone]

use an EEK needle and a 182 main, do a plug chop and get back to us..

[Snopczynski]

What needle do you have in it? What clip position is it in?

[2strokepat]

use an EEK needle and a 182 main, do a plug chop and get back to us..

 

 

I moved the clip on the needle to the 3 position and most of the bog is gone now the bog is at like the 1/4 throtle spot. it also has a 195 main jet in it. the needle that is in it says "ceg on it. were can I buy that needle you said to buy. the other question is the air screw is all the way in does that meen I need a smaller pilot jet it has a 47 in it.

[Snopczynski]

I moved the clip on the needle to the 3 position and most of the bog is gone now the bog is at like the 1/4 throtle spot. it also has a 195 main jet in it. the needle that is in it says "ceg on it. were can I buy that needle you said to buy. the other question is the air screw is all the way in does that meen I need a smaller pilot jet it has a 47 in it.

 

 

That needle is for a twin carb setup. you need at least an eek or an eej to start with. Sudco, cascade, carb parts wherehouse, and ironically pats small engine all sell the needles.

Edited November 14, 2007 by Snopczynski