Jump to content

Recommended Posts

Posted

My headlights are getting power, but just enough to make the filiment glow, but not put out any light. What else could be causing this besides the voltage regulator?

 

thanks

Posted
My headlights are getting power, but just enough to make the filiment glow, but not put out any light. What else could be causing this besides the voltage regulator?

 

thanks

 

 

un-couple the lighting coil from harness. Black and yellow wires, remove the blue wire from the reg, remove all light bulbs, use an ohm meter to test from the harness side yellow wire to ground. If you have anything at all other than open line "OL", then you have a short somewhere. Before I went that far, I would test the output with the regulator plugged in. Use AC on your meter. anything under 11.5 is a problem and should be over 13.

 

 

Brandon

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...