Shee9899 Posted October 31, 2007 Report Posted October 31, 2007 Just installed new set of T5s, falls on its face from about 1/2 to 3/4 throttle on stock carbs&jets, got any suggestions on jetting. (above sea level). Quote
J-Madd Posted October 31, 2007 Report Posted October 31, 2007 Just installed new set of T5s, falls on its face from about 1/2 to 3/4 throttle on stock carbs&jets, got any suggestions on jetting. (above sea level). Stock air filter? Lid? Temperature? Approximate elevaton? Any other mods? A little more info, and we can help ya out. :beer: Quote
Toybreaker Posted November 2, 2007 Report Posted November 2, 2007 Set up on my wifes bike with: no porting K&N No lid Boysen rad valves t-5's Toomey needles 280 mains 27.5 pilot 1.5 turns out on idle screw needle on 3 groove from the top Jetted for Glamis. In the colder months I go 2 grooves from the top with the needle. Them main is a bit fat but fat won't kill the motor like lean will. Always start FAT and lean it down. Read the jetting sticky. Quote
Shee9899 Posted November 2, 2007 Author Report Posted November 2, 2007 Stock air filter? Lid? Temperature? Approximate elevaton? Any other mods? A little more info, and we can help ya out. :beer: Air lid removed,stock air filter, 70 degrees, 4000 feet above sea level, .060 over, coolhead 20cc, carbon fiber reeds, boost bottle. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.