wiecha17 Posted October 26, 2007 Report Posted October 26, 2007 ok im new to banshee hq but hear me out .. im 16 got a 03 shee. got an dura blue x 33 axle . asr +2 up 1 a arms . crj lowering kit . trinity pipes. K&N pod fliters. and now since the summer of flat track is over im looking to re do my engine up a bit .. i have been looking around and a buddy of mine had a 421 trinity kit on his with a 7 mm stoker . and that thing hauls on the 1/4 mile track . i was looking around and vitos performance had the cylinders for 1146.90 (out of stock now) and then get a 4 mm crank for 500 and then a new head. am i reading this right i could have an engine like his for about 1700 w/out head and barbs ? or what else should i do to this engine ??? i dont really want to break the bank with this one cause im looking for a vehicle to drive myself around in,.... and give me a price to what i would be looking to spend on each part?! -thanks alot -scott Quote
Canadarider Posted October 27, 2007 Report Posted October 27, 2007 ok im new to banshee hq but hear me out .. im 16 got a 03 shee. got an dura blue x 33 axle . asr +2 up 1 a arms . crj lowering kit . trinity pipes. K&N pod fliters. and now since the summer of flat track is over im looking to re do my engine up a bit .. i have been looking around and a buddy of mine had a 421 trinity kit on his with a 7 mm stoker . and that thing hauls on the 1/4 mile track . i was looking around and vitos performance had the cylinders for 1146.90 (out of stock now) and then get a 4 mm crank for 500 and then a new head. am i reading this right i could have an engine like his for about 1700 w/out head and barbs ? or what else should i do to this engine ??? i dont really want to break the bank with this one cause im looking for a vehicle to drive myself around in,.... and give me a price to what i would be looking to spend on each part?!-thanks alot -scott Hey scott . I would go with a pro mx port from trinity on your stock jugs , get a timming plate set it at +4, 30mm carbs, cool head with 21cc domes some reed I like my TDR reeds with my ported cages . then but some money in a sway-bar and shock to get the power to the track Pro mx port. 400$ us , from trinity Timing plate 35$cnd from Ricky stator Cool head and domes 300$us, from trinity Port cages free if you know how to do it TDR reed 100$ cnd Carbs 300$ cnd Sway-bar 350$cnd Elka's are like 550 to 1300$ cnd Over all what I'm saying the cub is to much for 1/4 flat track . not going to get to us the power and plus its way to much for tt too I got the money to buy a cub for flat tracker but ill say my money and and get more power to the track . Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.