Bansheeman11 Posted October 23, 2007 Report Posted October 23, 2007 Hi all, please can you help me on air filter size, i am running a 16mm 600 T Rex with CPI Banshee 6's and 38mm carbs, with length air filters do you think i should be using so i dont restrict the power? Quote
91banshee Posted October 23, 2007 Report Posted October 23, 2007 Hi all, please can you help me on air filter size, i am running a 16mm 600 T Rex with CPI Banshee 6's and 38mm carbs, with length air filters do you think i should be using so i dont restrict the power? i run 8s on a 543 they have 12' pods justs get the 12s no worrys at that point ,thats enough air for a big block chevy hows the weather over there in england mike Quote
Bansheeman11 Posted October 23, 2007 Author Report Posted October 23, 2007 Its a bit cold at the moment for us, about 5 Celcius. But then we always have rubbish weather over here!! What sort of rear wheel horsepower does your 543 have, i am trying to get mine dialed in at the moment and need some benchmarks. Quote
Bansheeman11 Posted October 30, 2007 Author Report Posted October 30, 2007 Hi guys, i know my T-REX wont make quite as much power as the modern cylinders but where do you guys think i should be from my set-up (38mm carbs, CPI banshee 6's, stock ignition, 12.1:1 compression ratio, fully race ported, power peak at 9500rpm) any horsepower figures or dyno graphs from similar T-Rex motors would be very much helpful. Any advice or numbers to aim for please! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.