racer Posted September 5, 2007 Report Posted September 5, 2007 Anyone know where I can get the retainer circlip that holds a YFZ450 damper together? I managed to lose mine while moving over the summer and I now appear to be fucked. Quote
FireHead Posted September 5, 2007 Report Posted September 5, 2007 Anyone know where I can get the retainer circlip that holds a YFZ450 damper together? I managed to lose mine while moving over the summer and I now appear to be fucked. Email Yamaha directly. Tell them you are a college engineering student and this is part of your Mini Baja project. I don't think you can buy just this part from Yamaha, so this might be the only way to get this done. :thumbsup: Quote
racer Posted September 7, 2007 Author Report Posted September 7, 2007 No sir, you can't buy it at all; however emailing Yamaha is a good idea. Unless that works, it looks like I'll be making one. Quote
FireHead Posted September 7, 2007 Report Posted September 7, 2007 No sir, you can't buy it at all; however emailing Yamaha is a good idea. Unless that works, it looks like I'll be making one. Once you get the email done, tell me what email address is you used and I will see if I can maybe help some. :geek: Quote
racer Posted September 7, 2007 Author Report Posted September 7, 2007 You don't happen to have one off hand do you, Mark? Quote
FireHead Posted September 7, 2007 Report Posted September 7, 2007 You don't happen to have one off hand do you, Mark? Yamaha Motor Corporation 6555 Katella Avenue Cypress, CA 90630 (800) 962-7926 That's the customer service unit at their R&D center in SoCal. I am not sure I can expediently conjure an email address this morning. Try that phone number, if it doesn;t work out well, I will try and get a direct email address for someone. Quote
racer Posted September 8, 2007 Author Report Posted September 8, 2007 BadAss, Thanks Mark. I am going to call them Monday morning. Quote
racer Posted September 9, 2007 Author Report Posted September 9, 2007 Well, I went ahead and pulled another clip out of the same damper. Its not the same diameter, however the size or wire appears to be the same. It measures .0880 in. If it comes down to it ill just calculate the circumference I need. Quote
FireHead Posted September 10, 2007 Report Posted September 10, 2007 Well, I went ahead and pulled another clip out of the same damper. Its not the same diameter, however the size or wire appears to be the same. It measures .0880 in. If it comes down to it ill just calculate the circumference I need. Did you not have any luck with Yamaha? Coming up with the proper circumference sounds like something that will result in alot of trial and error after you begin the learning process involved in spring clip design theory. :geek: Quote
racer Posted September 10, 2007 Author Report Posted September 10, 2007 I dont think it will. Yamaha is pretty good about making their clips fit tight. So I'll make the circumference of mine the same size, or a tad larger, as the inner circumference of the shock bore. Then once it springs into the clip groove I should be OK. I haven't tried them yet. Monday is probably my busiest day of the week, so it will be late in the afternoon before I call them. The 2 hour time diff is going to let me have my cake and eat it too! Quote
racer Posted December 13, 2007 Author Report Posted December 13, 2007 I got off my lazy ass last night and built one from .065 piano wire. Fits tits, works perfect. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.