Help with jetting please

[bigdaddy69]

I need help Jetting a buddys bike. Right now it has 190 mains and 50 pilots needle on second clip from the top. Bike has t5's, trinity single carb setup 35 pwk, v force reeds milled head 30 thousandths and +4 timing. its pretty rich as it sits right now. elevation is 3000 ft.

[Banshee0028]

I need help Jetting a buddys bike. Right now it has 190 mains and 50 pilots needle on second clip from the top. Bike has t5's, trinity single carb setup 35 pwk, v force reeds milled head 30 thousandths and +4 timing. its pretty rich as it sits right now. elevation is 3000 ft.

Try a 185 or 180 if thats still too rich. I would also put the clip in the middle position. Prob best to change one thing at a time though. How is the midrange response?

[Snopczynski]

Need to know the needle size more than anything.

[letsgetthisdone]

my bike before porting ran a 175 at ~2500ft, and i had pretty much the same setup....so, start at a 175 main, EEK needle (middle clip), and a 45 pilot

[sredish]

at 3000' he may want to go back to the DEK needle. try a 180 main and see how it works there. if you need to go leaner, then swap back to the DEK and start over again with the 190....