baddsheee Posted September 1, 2007 Report Posted September 1, 2007 From a blwon head gasket I have a bit of water in the cylinders. Will that clean itself out or do I have to remove the jugs to clean? Installing the Noss head. Quote
FireHead Posted September 1, 2007 Report Posted September 1, 2007 From a blwon head gasket I have a bit of water in the cylinders. Will that clean itself out or do I have to remove the jugs to clean? Installing the Noss head. I would just run it as long as it is not more than 8oz of water (to make up a number). :geek: Quote
baddsheee Posted September 1, 2007 Author Report Posted September 1, 2007 I would just run it as long as it is not more than 8oz of water (to make up a number). :geek: It's only like 6oz. so I'm gonna run it. Got the head in and need some higher octane fuel. 161-162 PSI. Quote
letsgetthisdone Posted September 2, 2007 Report Posted September 2, 2007 ya, i'd run 50/50 with that compression... Quote
swrbansheeboy Posted September 4, 2007 Report Posted September 4, 2007 From a blwon head gasket I have a bit of water in the cylinders. Will that clean itself out or do I have to remove the jugs to clean? Installing the Noss head. take a shop vac and suck out all that you can then run it.... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.