Cykotik Posted August 30, 2007 Report Posted August 30, 2007 i put mine on today and it doesnt have a spot for the parkign brake or the brake light... (which mine didnt work anyway) is there an easy way to disconnect it? Quote
Bansh-eman Posted August 30, 2007 Report Posted August 30, 2007 you have to just disconnect the wire and plug for the tors control and light... and then remove the ebrak line from the bars all the way to the rear caliper. and get a block off plate... its very ez to do... while your at it replace your light switch and your kill switch. i use a cr250 kill switch and rewired my ligths to a toggle that is under my frame by my pngle... really cleans up your bars... Quote
Cykotik Posted August 30, 2007 Author Report Posted August 30, 2007 where do you get the block off? and could you post me some pictures of your kill switch? you got me very interested Quote
Cykotik Posted August 30, 2007 Author Report Posted August 30, 2007 where do you get the block off? and could you post me some pictures of your kill switch? you got me very interested Quote
Cykotik Posted August 30, 2007 Author Report Posted August 30, 2007 where do you get the block off? and could you post me some pictures of your kill switch? you got me very interested Quote
Bansh-eman Posted August 30, 2007 Report Posted August 30, 2007 you can get the blockoff from ebay. my bike is stripped down right now, so i cant get you picts. all i can do is kinda stick the parts up there and snap a shot Quote
Cykotik Posted August 31, 2007 Author Report Posted August 31, 2007 you son of a @#@%$ haha alright well im curious if anyone else has this i want to look into this Quote
samc Posted August 31, 2007 Report Posted August 31, 2007 where do you disconnect it at? i still gotta disconnect mine.. i already took the cable and all off. Quote
shanYE west Posted August 31, 2007 Report Posted August 31, 2007 you son of a @#@%$ haha alright well im curious if anyone else has this i want to look into this I use a yz style kill. You can get them from RMATV for 10 bucks. I dont have the grips on yet but you can see the red button on the left bar. I dont seem to have a better pic other then this one. And you can see the blue block off on the rear caliper. Quote
Cykotik Posted August 31, 2007 Author Report Posted August 31, 2007 could you take some close up pics for me? i like the idea about mounting it under the seat ... though Quote
shanYE west Posted August 31, 2007 Report Posted August 31, 2007 could you take some close up pics for me?i like the idea about mounting it under the seat ... though Yeah I'll get some for ya this weekend.. I wont be back from the dunes until Mon. Quote
ClimbAnyHill Posted September 10, 2007 Report Posted September 10, 2007 It's easy to disconected the parking brake, simply remove the lever and follow the cable & disconect. Follow the electricals and disconect. Nothing to it. You should look at Casper's bike who has that kill switch and button for his lights on the tank cover. Looks pretty neat! Quote
Cykotik Posted September 11, 2007 Author Report Posted September 11, 2007 didnt know casper had this set up... casper post some pics Quote
Justintoxicated Posted September 11, 2007 Report Posted September 11, 2007 I had buttons on the front radiator shroud and I did not like it, they are harder to use while riding. It works though if you can't figure out where else to put them. I don't have the brake light so no help from me there. Just need a blockoff plate and disconnect the TORS under the plastics near the gas tank on the left hand side, there is a box located there. There is also another cable you can disconnect from the thumb throttle if I remember correctly. I have the ASV brake lever but run the yamaha Factory Racing clutch lever. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.